Sourcing Photonics West lightbox LED modules for a modular pavilion? Compare neighboring illuminated graphics together before choosing bars for each section. These sources are for exhibit branding, not optical calibration instruments.
How do I keep neighboring pavilion lightboxes visually consistent?
Use actual printed-front samples and a common white-light target to compare the sections together. Check the selected models' CCT, optics and output, plus each enclosure's depth and source spacing. The same print file alone does not establish the same illuminated result. Keep blockout storage graphics outside the internal-lightbox component count.
Can different LED bar models share one pavilion lighting plan?
Different models may suit different enclosure sections, but confirm their visual result with the final fronts before approving them together. Do not mix bars just because the connectors look alike. Verify voltage, pinout, polarity, load and each model's wiring limits separately. A long pavilion perimeter is not permission to build one continuous electrical run or to modify a supplier's rental frame.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for a multi-section lightbox component order?
Label each illuminated section and send its front sample, dimensions, clear depth, mounting positions and supply labels. Include a comparison of neighboring fronts and explain which graphics are blockout or externally lit. Agree suitable white light and output for the actual prints before calculating quantities. Our featured bars are white-light sources, not RGB or scientific test-lightbox systems.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the section schedule and actual front samples to compare suitable internal bars and request a component quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Sourcing Photonics West lightbox LED modules for a modular pavilion? Compare neighboring illuminated graphics together before choosing bars for each section. These sources are for exhibit branding, not optical calibration instruments.
How do I keep neighboring pavilion lightboxes visually consistent?
Use actual printed-front samples and a common white-light target to compare the sections together. Check the selected models' CCT, optics and output, plus each enclosure's depth and source spacing. The same print file alone does not establish the same illuminated result. Keep blockout storage graphics outside the internal-lightbox component count.
Can different LED bar models share one pavilion lighting plan?
Different models may suit different enclosure sections, but confirm their visual result with the final fronts before approving them together. Do not mix bars just because the connectors look alike. Verify voltage, pinout, polarity, load and each model's wiring limits separately. A long pavilion perimeter is not permission to build one continuous electrical run or to modify a supplier's rental frame.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for a multi-section lightbox component order?
Label each illuminated section and send its front sample, dimensions, clear depth, mounting positions and supply labels. Include a comparison of neighboring fronts and explain which graphics are blockout or externally lit. Agree suitable white light and output for the actual prints before calculating quantities. Our featured bars are white-light sources, not RGB or scientific test-lightbox systems.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the section schedule and actual front samples to compare suitable internal bars and request a component quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.