Searching for The Pharmacy Show lightbox LED modules? Compare internal sources for your own printed brand or service-message display, with the finished graphic tested before ordering.
Which LEDs suit backlit brand messages?
Compare edge-lit and rear-backlight layouts with the actual printed face and usable depth. Check pale backgrounds and dark letter strokes for light bands or uneven areas before choosing sources.
How should I test small text on a lightbox graphic?
Test the finished print in the planned frame at the intended reading distance and angle. Check fine letters and surrounding pale areas together; more brightness alone does not prove that small text is readable.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send to compare modules?
Send a finished graphic sample, smallest text size, viewing distance, frame section, usable depth and supply details. Confirm mounting and wiring for your own display; these are internal lightbox sources, not clinical task lighting.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with your message graphic and lightbox dimensions to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for The Pharmacy Show lightbox LED modules? Compare internal sources for your own printed brand or service-message display, with the finished graphic tested before ordering.
Which LEDs suit backlit brand messages?
Compare edge-lit and rear-backlight layouts with the actual printed face and usable depth. Check pale backgrounds and dark letter strokes for light bands or uneven areas before choosing sources.
How should I test small text on a lightbox graphic?
Test the finished print in the planned frame at the intended reading distance and angle. Check fine letters and surrounding pale areas together; more brightness alone does not prove that small text is readable.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send to compare modules?
Send a finished graphic sample, smallest text size, viewing distance, frame section, usable depth and supply details. Confirm mounting and wiring for your own display; these are internal lightbox sources, not clinical task lighting.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with your message graphic and lightbox dimensions to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.