Looking for NMBS Exhibition lightbox LED modules for a reusable stand wall? Compare internal LED bars using the revised illuminated opening and actual frame construction, rather than the overall booth footprint.
Can I keep the same LED bar quantity when a lightbox wall is resized?
Do not assume the previous quantity still suits the new opening. Compare the old and revised illuminated dimensions, clear depth and source mounting positions. Recalculate the selected bar layout and total load, then test the final graphic on the planned source before committing to quantities.
Should LED quantities follow the booth footprint or the illuminated panel?
Use the actual lightbox faces. A larger or smaller stand area does not establish how much of its wall is backlit. Keep ordinary product panels and door displays separate, and review each resized graphic enclosure against its own geometry and source distribution.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What needs checking in a reused lightbox wiring harness?
Check the revised wiring route, cable condition, connector pinout, polarity and supply capacity against the chosen bars. Confirm mounting clearance and accessible connections in the reconfigured frame. A reused plug or frame does not establish electrical or optical compatibility.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send the old and revised lightbox drawings, final graphic sample and power labels to review internal bars for the resized wall.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for NMBS Exhibition lightbox LED modules for a reusable stand wall? Compare internal LED bars using the revised illuminated opening and actual frame construction, rather than the overall booth footprint.
Can I keep the same LED bar quantity when a lightbox wall is resized?
Do not assume the previous quantity still suits the new opening. Compare the old and revised illuminated dimensions, clear depth and source mounting positions. Recalculate the selected bar layout and total load, then test the final graphic on the planned source before committing to quantities.
Should LED quantities follow the booth footprint or the illuminated panel?
Use the actual lightbox faces. A larger or smaller stand area does not establish how much of its wall is backlit. Keep ordinary product panels and door displays separate, and review each resized graphic enclosure against its own geometry and source distribution.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What needs checking in a reused lightbox wiring harness?
Check the revised wiring route, cable condition, connector pinout, polarity and supply capacity against the chosen bars. Confirm mounting clearance and accessible connections in the reconfigured frame. A reused plug or frame does not establish electrical or optical compatibility.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send the old and revised lightbox drawings, final graphic sample and power labels to review internal bars for the resized wall.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.