Searching for NBAA-BACE lightbox LED modules or LED bars for joined exhibition backwalls? Compare internal sources for graphic lightbox sections beside ordinary printed filler panels.
Which LEDs suit joined lightbox backwall sections?
Match source dimensions and optics to each illuminated section, print sample, usable frame depth and mounting spans. Test the intended lighting layout section by section.
How do lit graphics meet non-lit printed filler panels?
Check artwork alignment across joints and compare brightness at the transition. Identify which sections are illuminated; ordinary filler panels need separate print decisions, not an assumed LED retrofit.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What section, print and access details should I send?
Send the lit and non-lit section plan, print samples, frame depths, mounting spans, seams, filler widths, connector access and supply. Verify fit and model-specific wiring limits. Graphic LEDs do not imply aircraft or avionics approval or guaranteed rental-frame compatibility.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your backwall section plan to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for NBAA-BACE lightbox LED modules or LED bars for joined exhibition backwalls? Compare internal sources for graphic lightbox sections beside ordinary printed filler panels.
Which LEDs suit joined lightbox backwall sections?
Match source dimensions and optics to each illuminated section, print sample, usable frame depth and mounting spans. Test the intended lighting layout section by section.
How do lit graphics meet non-lit printed filler panels?
Check artwork alignment across joints and compare brightness at the transition. Identify which sections are illuminated; ordinary filler panels need separate print decisions, not an assumed LED retrofit.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What section, print and access details should I send?
Send the lit and non-lit section plan, print samples, frame depths, mounting spans, seams, filler widths, connector access and supply. Verify fit and model-specific wiring limits. Graphic LEDs do not imply aircraft or avionics approval or guaranteed rental-frame compatibility.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your backwall section plan to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.