Looking for NASS exhibition lightbox LED modules or LED bars for stand branding? Compare internal sources for an added brand lightbox beside separately lit counters and cabinets.
Which LEDs suit an exhibition brand lightbox?
Compare edge-lit and rear-backlight layouts with the actual face material, artwork and usable depth. Check the lightbox independently of decorative logo and cabinet lighting.
Can LEDs share the decorative-lighting supply?
Do not assume the circuits match. Check each model's voltage, load, polarity, connector and control requirements with the builder; decorative colour lighting may need a different supply or controller.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What lightbox and circuit details should I send?
Send face dimensions and material, frame sections, mounting space, wiring layout and supply specifications. These LEDs illuminate exhibition graphics, not surgical, diagnostic or treatment equipment.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your added lightbox and lighting-circuit details to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for NASS exhibition lightbox LED modules or LED bars for stand branding? Compare internal sources for an added brand lightbox beside separately lit counters and cabinets.
Which LEDs suit an exhibition brand lightbox?
Compare edge-lit and rear-backlight layouts with the actual face material, artwork and usable depth. Check the lightbox independently of decorative logo and cabinet lighting.
Can LEDs share the decorative-lighting supply?
Do not assume the circuits match. Check each model's voltage, load, polarity, connector and control requirements with the builder; decorative colour lighting may need a different supply or controller.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What lightbox and circuit details should I send?
Send face dimensions and material, frame sections, mounting space, wiring layout and supply specifications. These LEDs illuminate exhibition graphics, not surgical, diagnostic or treatment equipment.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your added lightbox and lighting-circuit details to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.