Searching for NACS Show lightbox LED modules or LED bars for overhead logo signs? Compare internal sources for the printed faces of multi-face exhibition lightboxes.
Which LEDs suit the printed faces of an overhead logo sign?
Match source dimensions and optics to each face, usable frame depth and mounting spans. Test the actual printed logo and lighting layout face by face.
How should separate sign faces be tested and wired?
Check each face from its visitor approach direction. Plan connectors and lighting cable access before closing the sign; verify supply capacity and model-specific wiring limits.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What face, frame and access details should I send?
Send each print sample, frame depth, mounting spans, cable access, connectors, lighting supply and support plan. Verify every fit. LED modules supply light; they do not certify the sign’s support, rigging or load capacity.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your sign-face and wiring layout to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for NACS Show lightbox LED modules or LED bars for overhead logo signs? Compare internal sources for the printed faces of multi-face exhibition lightboxes.
Which LEDs suit the printed faces of an overhead logo sign?
Match source dimensions and optics to each face, usable frame depth and mounting spans. Test the actual printed logo and lighting layout face by face.
How should separate sign faces be tested and wired?
Check each face from its visitor approach direction. Plan connectors and lighting cable access before closing the sign; verify supply capacity and model-specific wiring limits.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What face, frame and access details should I send?
Send each print sample, frame depth, mounting spans, cable access, connectors, lighting supply and support plan. Verify every fit. LED modules supply light; they do not certify the sign’s support, rigging or load capacity.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your sign-face and wiring layout to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.