Looking for LogiMAT counter lightbox LED modules or LED bars for a fabric display pillar? Choose the internal source for each printed face separately; a small counter and a tall sign need different layouts.
Which LED bars suit the counter and the pillar?
Start with each lit size, clear depth and mounting span. Compare edge lighting and rear backlighting with the actual fabric sample. A bar that fits the tall frame may be too long for the counter.
Can both lightboxes share a power supply?
Only if voltage, total load, connectors, polarity and controls match. Plan separate branches and service access. A stand mains socket must feed a suitable LED power supply; never connect low-voltage bars directly to it.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What measurements should I send?
Send separate counter and pillar drawings, lit dimensions, clear depth, fabric samples, mounting spans, connector photos and power-supply labels. Confirm frame ownership before changing a rental lightbox.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send both frame drawings to review suitable bar lengths and supply requirements.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for LogiMAT counter lightbox LED modules or LED bars for a fabric display pillar? Choose the internal source for each printed face separately; a small counter and a tall sign need different layouts.
Which LED bars suit the counter and the pillar?
Start with each lit size, clear depth and mounting span. Compare edge lighting and rear backlighting with the actual fabric sample. A bar that fits the tall frame may be too long for the counter.
Can both lightboxes share a power supply?
Only if voltage, total load, connectors, polarity and controls match. Plan separate branches and service access. A stand mains socket must feed a suitable LED power supply; never connect low-voltage bars directly to it.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What measurements should I send?
Send separate counter and pillar drawings, lit dimensions, clear depth, fabric samples, mounting spans, connector photos and power-supply labels. Confirm frame ownership before changing a rental lightbox.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send both frame drawings to review suitable bar lengths and supply requirements.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.