Looking for InfoComm lightbox LED modules or LED bars for printed Pro AV stand graphics? Compare internal sources for backlit printed panels beside active exhibition screens.
Which LEDs suit printed Pro AV stand lightboxes?
Match source dimensions and optics to the actual backlit print, usable depth and mounting spans. Compare edge-lit and rear-backlight layouts with your printed sample.
How should printed graphics be tested beside active screens?
Power the surrounding displays at their planned brightness while testing the real print. Compare graphic density, colour and readability from visitor positions; matching a screen image alone does not confirm the printed result.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print, screen-layout and power details should I send?
Send print samples, frame depths, mounting spans, screen positions and operating brightness, viewing positions, connector access and supply. Verify fit and model-specific wiring limits. Graphic lightbox LEDs do not imply display-panel repair or screen-backlight compatibility.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your print sample and screen-layout details to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for InfoComm lightbox LED modules or LED bars for printed Pro AV stand graphics? Compare internal sources for backlit printed panels beside active exhibition screens.
Which LEDs suit printed Pro AV stand lightboxes?
Match source dimensions and optics to the actual backlit print, usable depth and mounting spans. Compare edge-lit and rear-backlight layouts with your printed sample.
How should printed graphics be tested beside active screens?
Power the surrounding displays at their planned brightness while testing the real print. Compare graphic density, colour and readability from visitor positions; matching a screen image alone does not confirm the printed result.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print, screen-layout and power details should I send?
Send print samples, frame depths, mounting spans, screen positions and operating brightness, viewing positions, connector access and supply. Verify fit and model-specific wiring limits. Graphic lightbox LEDs do not imply display-panel repair or screen-backlight compatibility.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your print sample and screen-layout details to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.