Illuminated Bootcamp brings signmakers and project teams together for practical illuminated-sign learning. For your own indoor lightbox project, turn sample observations into a clearly scoped component brief. Browse all LED Modules and compare candidates for the full build.
State the limits of the training sample
Record the sample frame size, internal depth, face material, source positions and power arrangement. Label which areas were actually reviewed. A small illuminated sample is useful for learning, but it does not establish uniform illumination across a larger frame or validate a different printed face.
Keep a separate review for the production size
List every change between the sample and the proposed build, including frame spans, depth, source count, wiring and face tension. Have qualified personnel review the model-specific power and mounting details. Review the full-size assembly with its actual graphic before approving a production order; do not obtain a layout simply by multiplying the sample dimensions.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a good small sample prove a larger lightbox layout?
No. Record the small sample as evidence for its own configuration. A larger or differently constructed lightbox needs a separate fit, wiring and illuminated-face review; matching the bar model alone does not prove equivalent results.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the sample record, proposed production dimensions, changed construction details, LED candidates, full-size observations and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Illuminated Bootcamp brings signmakers and project teams together for practical illuminated-sign learning. For your own indoor lightbox project, turn sample observations into a clearly scoped component brief. Browse all LED Modules and compare candidates for the full build.
State the limits of the training sample
Record the sample frame size, internal depth, face material, source positions and power arrangement. Label which areas were actually reviewed. A small illuminated sample is useful for learning, but it does not establish uniform illumination across a larger frame or validate a different printed face.
Keep a separate review for the production size
List every change between the sample and the proposed build, including frame spans, depth, source count, wiring and face tension. Have qualified personnel review the model-specific power and mounting details. Review the full-size assembly with its actual graphic before approving a production order; do not obtain a layout simply by multiplying the sample dimensions.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a good small sample prove a larger lightbox layout?
No. Record the small sample as evidence for its own configuration. A larger or differently constructed lightbox needs a separate fit, wiring and illuminated-face review; matching the bar model alone does not prove equivalent results.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the sample record, proposed production dimensions, changed construction details, LED candidates, full-size observations and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.