Looking for IFE lightbox LED modules or LED bars for a food exhibition backlit graphic? Compare internal sources for printed food-brand walls in compatible indoor lightboxes.
Which LED modules suit an IFE printed lightbox wall?
Compare edge-lit and rear-backlight bars using the illuminated face size, usable frame depth and mounting spans. Check source length, optics, distance to the print and supply compatibility. Booth floor area does not determine lightbox depth. These are internal components; the frame, printed graphic and power system require separate checks.
How do I check food packaging artwork under backlighting?
Test the actual approved backlit print under the planned hall lighting. Inspect package images, small ingredient lettering, pale areas and dark brand backgrounds from aisle and conversation distances. Check bright spots, shadows and unintended light transmission before fixing the LED layout. A screen preview or a higher wattage alone cannot establish how the printed graphic will look.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can I service the LEDs without moving the whole booth?
Plan a reachable service opening and removable graphic or access panel before placing storage and furniture. Keep connectors accessible, label circuits and check supply capacity against the chosen layout. Send face dimensions, internal depth, mounting spans, a print sample, voltage, connector photos and the opening location for selection. Confirm frame, electrical and venue requirements before ordering.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your food-brand print sample and frame details to compare suitable internal sources before ordering.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for IFE lightbox LED modules or LED bars for a food exhibition backlit graphic? Compare internal sources for printed food-brand walls in compatible indoor lightboxes.
Which LED modules suit an IFE printed lightbox wall?
Compare edge-lit and rear-backlight bars using the illuminated face size, usable frame depth and mounting spans. Check source length, optics, distance to the print and supply compatibility. Booth floor area does not determine lightbox depth. These are internal components; the frame, printed graphic and power system require separate checks.
How do I check food packaging artwork under backlighting?
Test the actual approved backlit print under the planned hall lighting. Inspect package images, small ingredient lettering, pale areas and dark brand backgrounds from aisle and conversation distances. Check bright spots, shadows and unintended light transmission before fixing the LED layout. A screen preview or a higher wattage alone cannot establish how the printed graphic will look.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can I service the LEDs without moving the whole booth?
Plan a reachable service opening and removable graphic or access panel before placing storage and furniture. Keep connectors accessible, label circuits and check supply capacity against the chosen layout. Send face dimensions, internal depth, mounting spans, a print sample, voltage, connector photos and the opening location for selection. Confirm frame, electrical and venue requirements before ordering.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your food-brand print sample and frame details to compare suitable internal sources before ordering.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.