Searching for HD Expo fabric lightbox LED modules? Compare sources for your own reusable printed display as hospitality artwork and materials change.
Does a new fabric graphic require new LEDs?
Not automatically. Test the new printed face with the intended sources first. A different fabric or print density can change the result; confirm any component change with the frame builder.
What should I test when refreshing the printed face?
Fit the actual new graphic in the planned frame. Compare pale backgrounds and detailed material images for bright bands or dark areas. A satisfactory earlier print does not prove the new one will look the same.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send to compare lightbox modules?
Send old and new fabric details, artwork samples, frame section, usable depth and supply information. Check source direction, mounting and wiring; no replacement fit in a proprietary frame is claimed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with the new graphic sample and frame details to compare sources for your fabric lightbox.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for HD Expo fabric lightbox LED modules? Compare sources for your own reusable printed display as hospitality artwork and materials change.
Does a new fabric graphic require new LEDs?
Not automatically. Test the new printed face with the intended sources first. A different fabric or print density can change the result; confirm any component change with the frame builder.
What should I test when refreshing the printed face?
Fit the actual new graphic in the planned frame. Compare pale backgrounds and detailed material images for bright bands or dark areas. A satisfactory earlier print does not prove the new one will look the same.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send to compare lightbox modules?
Send old and new fabric details, artwork samples, frame section, usable depth and supply information. Check source direction, mounting and wiring; no replacement fit in a proprietary frame is claimed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with the new graphic sample and frame details to compare sources for your fabric lightbox.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.