Searching for Fotografiska Stockholm exhibition lightbox LED modules or LED bars for printed black-mask lightboxes? Compare internal sources for illuminated graphic windows surrounded by printed masking.
Which LED modules suit masked exhibition graphic lightboxes?
Compare edge-lit and rear-backlight bars with the full approved mask print, light-window positions, usable depth and mounting spans. Source length, optics and distance to the graphic affect the layout. Verify the actual layer order and existing frame compatibility; source selection does not determine artwork support.
How do I test the light windows and surrounding printed mask?
Test the complete print and approved layer arrangement under the planned exhibition lighting. Inspect the intended light windows for bright or dark areas, then check the surrounding printed mask for unwanted light spill from the actual viewing positions. Mask coverage alone does not establish opacity or uniform illumination; test before fixing source placement.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What mask print, frame and power details should I send?
Send the approved full mask print, window layout, illuminated dimensions, internal depth, mounting spans, source distance, final layer order, viewing positions, service access, connectors and supply. Verify layout and wiring before ordering. Original artwork support, conservation requirements and thermal exposure need separate specialist approval; these LED components do not certify suitability for fragile originals.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your approved mask print and light-window layout to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for Fotografiska Stockholm exhibition lightbox LED modules or LED bars for printed black-mask lightboxes? Compare internal sources for illuminated graphic windows surrounded by printed masking.
Which LED modules suit masked exhibition graphic lightboxes?
Compare edge-lit and rear-backlight bars with the full approved mask print, light-window positions, usable depth and mounting spans. Source length, optics and distance to the graphic affect the layout. Verify the actual layer order and existing frame compatibility; source selection does not determine artwork support.
How do I test the light windows and surrounding printed mask?
Test the complete print and approved layer arrangement under the planned exhibition lighting. Inspect the intended light windows for bright or dark areas, then check the surrounding printed mask for unwanted light spill from the actual viewing positions. Mask coverage alone does not establish opacity or uniform illumination; test before fixing source placement.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What mask print, frame and power details should I send?
Send the approved full mask print, window layout, illuminated dimensions, internal depth, mounting spans, source distance, final layer order, viewing positions, service access, connectors and supply. Verify layout and wiring before ordering. Original artwork support, conservation requirements and thermal exposure need separate specialist approval; these LED components do not certify suitability for fragile originals.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your approved mask print and light-window layout to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.