Exhibition Arm Lights for Booth Graphics and Display Panels
Compare exhibition arm lights that mount to booth frames, display panels and portable exhibit structures. These fixtures serve closely related uses; differences in wattage, output, beam, head design, color temperature, mounting and power connection help buyers match a model to the actual layout.
For a focused list of popular booth-mounted models, browse LED Display Arm Lights.
Compare the Specifications That Change the Result
| Factor | What to Compare |
|---|---|
| Output | Stated lumens for the exact model, not wattage alone |
| Coverage | Beam angle, light-head width, arm reach and mounting distance |
| Color temperature | One fixed CCT range or switchable Tri-CCT settings |
| Color rendering | Model-specific CRI when accurate graphic or product color matters |
| Mounting | Clamp opening, profile shape, slider or bracket compatibility |
| Power | Standalone connection or linkable system with a stated run limit |
| Ordering format | Single fixture, kit or multi-pack and the included cables and hardware |
Similar Uses, Different Configurations
11W, 16W, 20W, 21W, 25W, 43W and 50W arm lights can all illuminate exhibition graphics, backwalls and product areas. A higher wattage does not automatically make one model correct for a particular booth size. Use measured output and beam geometry together with the graphic width, mounting height and ambient light.
- Fixed-CCT models are ordered in one listed color-temperature range.
- Tri-CCT models provide the stated switchable settings on the fixture.
- Wide or linear heads distribute light across a broader area.
- Narrower beams concentrate light more strongly on a selected area.
- Linkable models can share a planned power run within model-specific load limits.
- Standalone models require an individual power connection.
Start with Proven Models, Then Verify the Fit
The best-selling 25W products are useful starting points because they have prior order history, but they are not the only valid option for a standard booth. Compare them with lower- or higher-output fixtures when the mounting position, graphic width, packed size, color-temperature requirement or cable plan calls for a different configuration.
Products may appear in more than one collection because the same fixture can accurately match several search terms and applications. Collection membership is not intended to force each wattage into a separate use.
Before Ordering
- Measure the rail, extrusion, tube or panel at the mounting point.
- Confirm the selected body color, CCT and regional plug.
- Check whether the displayed price is for one fixture, a kit or a multi-pack.
- For linkable systems, calculate total connected wattage and follow the listed run limit.
- Review certification documentation for the exact model and configuration when required.
- Estimate quantity from the graphic, beam and mounting geometry, then test the layout when possible.
Use the LED Exhibition Arm Light Selection Guide for a specification-based comparison, or send the booth dimensions, frame photos and graphic width for a model and quantity recommendation.
-
25W Tri-CCT LED Trade Show Booth Light – 2500lm -
25W LED Booth Display Arm Light – 3250lm, Black or Gray -
25W Tri-CCT Linear LED Booth Arm Light – Black or White, 2500lm -
21W Linkable C-Clamp LED Booth Light – 1800–2100lm -
25W Tri-CCT Clamp-On LED Trade Show Light – 2500lm -
25W Linkable LED Trade Show Booth Arm Light – 3250lm -
50W Black Linkable LED Trade Show Light – 5500lm, Fixed CCT -
11W Low-Power Linkable LED Booth Arm Light – 1100–1210lm -
16W Standalone LED Display Arm Light – 1600lm, Fixed-CCT -
21W Linkable LED Booth Arm Light – 2100lm, Silver or Black -
43W High-Output LED Panel Display Light – 4300lm+ -
150W R7s Halogen Exhibition Spotlight – 68° Trade Show Display Light -
11W LED Retractable Banner Lights – C-Clamp, Bulk Packs -
Portable LED Graphic Display Light Kit – Two 11W Lights with Oxford Carry Bag -
43W Wide-Beam LED Display Arm Light – 3800lm -
Portable Trade Show Lighting Kits – 11W Clamp Lights + EVA Cases -
20W Compact LED Display Light – 1700lm Portable Trade Show Booth Light -
Bulk LED Exhibition Spotlights – 21W, 2000lm, 10-Pack+ -
20W COB Exhibition Flood Light – 1800lm, 120° Wide Beam, 10/20/100-Pack -
11W Linear LED Display Lights – 456mm, 10-Pack+ -
12W LED Graphic Panel Spotlight with Clamp – 1200lm, CRI90+, 10/20/100-Pack -
11W DIP LED Exhibition Spotlights – 1100lm, 10-Pack+ -
GU10 Curved-Arm Pop-Up Banner Light with Bulldog Clamp – 10/50/100-Pack -
50W Tri-CCT Linkable LED Trade Show Light – 5500lm
Exhibition Arm Lights for Booth Graphics and Display Panels
Compare exhibition arm lights that mount to booth frames, display panels and portable exhibit structures. These fixtures serve closely related uses; differences in wattage, output, beam, head design, color temperature, mounting and power connection help buyers match a model to the actual layout.
For a focused list of popular booth-mounted models, browse LED Display Arm Lights.
Compare the Specifications That Change the Result
| Factor | What to Compare |
|---|---|
| Output | Stated lumens for the exact model, not wattage alone |
| Coverage | Beam angle, light-head width, arm reach and mounting distance |
| Color temperature | One fixed CCT range or switchable Tri-CCT settings |
| Color rendering | Model-specific CRI when accurate graphic or product color matters |
| Mounting | Clamp opening, profile shape, slider or bracket compatibility |
| Power | Standalone connection or linkable system with a stated run limit |
| Ordering format | Single fixture, kit or multi-pack and the included cables and hardware |
Similar Uses, Different Configurations
11W, 16W, 20W, 21W, 25W, 43W and 50W arm lights can all illuminate exhibition graphics, backwalls and product areas. A higher wattage does not automatically make one model correct for a particular booth size. Use measured output and beam geometry together with the graphic width, mounting height and ambient light.
- Fixed-CCT models are ordered in one listed color-temperature range.
- Tri-CCT models provide the stated switchable settings on the fixture.
- Wide or linear heads distribute light across a broader area.
- Narrower beams concentrate light more strongly on a selected area.
- Linkable models can share a planned power run within model-specific load limits.
- Standalone models require an individual power connection.
Start with Proven Models, Then Verify the Fit
The best-selling 25W products are useful starting points because they have prior order history, but they are not the only valid option for a standard booth. Compare them with lower- or higher-output fixtures when the mounting position, graphic width, packed size, color-temperature requirement or cable plan calls for a different configuration.
Products may appear in more than one collection because the same fixture can accurately match several search terms and applications. Collection membership is not intended to force each wattage into a separate use.
Before Ordering
- Measure the rail, extrusion, tube or panel at the mounting point.
- Confirm the selected body color, CCT and regional plug.
- Check whether the displayed price is for one fixture, a kit or a multi-pack.
- For linkable systems, calculate total connected wattage and follow the listed run limit.
- Review certification documentation for the exact model and configuration when required.
- Estimate quantity from the graphic, beam and mounting geometry, then test the layout when possible.
Use the LED Exhibition Arm Light Selection Guide for a specification-based comparison, or send the booth dimensions, frame photos and graphic width for a model and quantity recommendation.