25W Tri-CCT Linear LED Booth Arm Light – Black or White, 2500lm

25W Tri-CCT linear LED booth arm light with black or white housing for exhibition graphics, artwork, display walls and coordinated booth structures. A built-in switch selects 3000K, 4500K or 6000K, while the linear light head provides a wide 120-degree beam.

• Output: 25W, 2,500 lm, CRI 90+
• Switchable CCT: 3000K / 4500K / 6000K
• Body colors: black or white
• Arm: 400mm standard; 500mm, 600mm or 700mm available by request
• Adjustment: 359-degree rotation and 0-90-degree tilt
• Plug options: US, EU, UK or AU

Color-Matched Linear Booth Lighting

Choose a black housing for dark frames and high-contrast booth structures, or white for light-colored walls, galleries and clean display systems. Fixture color changes appearance only; both body colors use the same published lighting platform.

The CCT switch provides three fixed settings, not continuously tunable white. Use 3000K for warmer presentations, 4500K for balanced general display lighting and 6000K for cooler technical or high-contrast graphics.

Specifications

Electrical acceptance varies by venue and destination. Confirm the exact model label, plug, production configuration and current exhibitor requirements before installation.

What's Included

• One 25W Tri-CCT linear LED arm light in the selected body color and plug type
• 3m power cord
• 1m extension cable
• Aluminum clamp

Confirm clamp opening, mounting surface, arm clearance and plug type against the booth system. Custom arm lengths must be confirmed before ordering.

Linking Multiple Lights

The published configuration supports up to 10 fixtures per run, representing a 250W nominal lighting load. The safe quantity may be lower depending on cable and plug ratings, branch-circuit capacity, local voltage, connector condition, extension layout and venue rules. Do not exceed the lowest-rated component in the complete system.

• Use the plug version intended for the destination.
• Inspect power and extension cables before installation.
• Confirm circuit capacity with the venue or qualified electrical provider.
• Distribute loads when required by the show contractor or local rules.

Choose This Linear Arm Light When

• A black or white fixture must coordinate with the booth frame or display wall.
• A linear light head is preferred over a compact panel-style head.
• Different exhibitions require warm, neutral or cool white from one fixture.
• A longer arm may be needed and can be confirmed before production.

For a compact clamp-focused design, compare the 25W Tri-CCT clamp-on arm light. Browse LED display arm lights or read the Tri-CCT exhibition lighting guide.

Display Applications for the Linear Light Head

• Art, photography and gallery-style booths: coordinate a white fixture with light walls or a black fixture with dark exhibition structures.
• Apparel, furniture and interior products: spread light across garments, materials, finishes and larger display surfaces.
• Jewelry, cosmetics and premium retail: use CRI90+ light to present color and surface detail.
• Technology, medical and industrial exhibits: direct the linear head toward equipment, samples, diagrams and demonstration areas.
• Exhibit builders and rental companies: use Tri-CCT switching and optional arm lengths to serve different compatible booth layouts.

Questions Before Ordering

Why choose a linear light head?
Choose it when you prefer the appearance and spread of a long bar-style head over a compact panel-style light. Both are display lights; the decision is about booth design, mounting position and the area being illuminated.

Can I change the arm length after ordering?
The standard arm is 400mm. Confirm a 500mm, 600mm or 700mm request before ordering because custom length is a production choice.

Is the light dimmable?
This page specifies three switchable color temperatures, not brightness dimming or continuously tunable white.

Will the clamp fit my booth frame?
Fit depends on the clamp opening, frame profile, mounting surface and clearance. Measure first or send photos and dimensions through our contact page.

Planning the Installation

Actual coverage depends on graphic size, mounting height, arm reach, beam overlap, ambient hall lighting, surface reflectance and target brightness. Test the intended layout before finalizing fixture quantity.

Send us the booth layout, graphic dimensions, preferred arm length and show location for a recommendation. For project quantities, see wholesale and volume pricing.