25W Portable LED Exhibition Arm Light – 3250lm, Linkable Multi-Mount System

Need a reliable, bright LED arm light for your 10×10 trade show booth? This 25W silver exhibition arm light delivers 3250lm with CRI 90+ color accuracy — the go-to choice for exhibitors at McCormick Place, LVCC, and Javits Center who need clean, professional illumination for products, graphics, and jewelry displays. UL & ETL certified. Tool-free setup in under 3 minutes.

What’s Included

• 1 × 25W LED Display Arm Light (Gray or Black)
• 1 × 3m Power Cord
• 1 × 1m Extension Cable (for daisy chaining)
• 1 × Large Aluminum Clamp — fits round and square frames up to 55mm (2.2") deep
• 1 × Small Aluminum Clamp — fits round and square frames up to 31mm (1.2") deep, more compact
• 1 × Dual M8 Bolt-Fix Bracket — for frames too thick for the clamp; screws onto flat frame surface, no thickness limit
• 1 × M8 Sliding Block Bracket — for frames with a T-slot channel; slides in and locks, no drilling needed

Mounting Compatibility — Works With Any Frame

Every light ships with 4 mounting options included at no extra cost — no additional purchase needed for most setups. Choose the one that fits your frame after receiving your order:

• Large Aluminum Clamp — round or square frames up to 55mm (2.2") deep
• Small Aluminum Clamp — round or square frames up to 31mm (1.2") deep, more compact
• Dual M8 Bolt-Fix Bracket — frames too thick for the clamp; screws onto flat frame surface, no thickness limit
• M8 Sliding Block Bracket — frames with a T-slot channel; slides in and locks, no drilling needed

Need extra brackets or replacement hardware? Browse our Mounting Systems collection →
Not sure which fits your frame? See our full mounting guide →

Recommended Booth Coverage

Key Features

• 3250lm Ultra Bright Output — Cuts through busy exhibition hall lighting
• Daisy-Chain up to 10 Units — Run your entire booth from a single power outlet
• CRI 90+ True Color Rendering — Essential for cosmetics, jewelry, printed graphics
• Portable & Travel-Ready — No batteries, no hazardous materials, fully airline-compliant
• Full 359° Rotation + 0–90° Tilt — Direct light precisely where it’s needed
• Universal AC85–245V — US, EU, UK, AU plugs available — works at shows worldwide
• UL & ETL Listed — Required for major US convention centers
• Aluminum Housing — 50,000-hour lifespan, flicker-free
• 3-Year Warranty — Factory direct

Need help choosing? Read our 10×10 Booth Lighting Setup Guide, 25W vs 50W: Which Should You Choose?, or visit our Trade Show Booth Lighting FAQ.

Best Use Cases

• Frequent Travelers & Road Warriors — Compact, lightweight, and airline-compliant.
• 10×10 Trade Show Booths — Most popular choice for standard inline booths at major US conventions.
• International Exhibitions — Universal AC85–245V input works at shows in the US, Europe, Asia, and Australia.
• Jewelry & Cosmetics Displays — CRI 90+ ensures gemstones, metals, and skin tones render accurately.
• Apparel & Textile Booths — Neutral 4500K renders fabric colors true-to-life.
• Photography & Video at Booth — Flicker-free output eliminates banding in photos and video.
• Retail Showrooms & Pop-Up Stores — Clamp mount works on shelving, display walls, and portable structures.

Built for the Trade Show Circuit

This fixture is designed for exhibitors who move. The die-cast aluminum housing withstands the vibration and impact of regular shipping. No fragile bulbs to replace, no batteries to worry about at security. Just pack it, fly with it, clamp it, and plug it in. Daisy-chain up to 10 units from a single outlet. Exhibitors report 200+ show cycles without failure.

CRI 90+ — Why It Matters for Your Products

At CRI 90+, your products look exactly as they should:

• Product colors appear true-to-life — no orange shift on reds, no yellow cast on whites
• Printed graphics look as vivid as the designer intended
• Skin tones render naturally for beauty and cosmetics brands
• Metallic finishes show their true luster

Installation — Under 3 Minutes, No Tools Required

1. Position the clamp — Slide onto the top horizontal bar of your booth frame
2. Tighten the clamp screw — Hand-tighten until secure. No tools required.
3. Set the arm angle — Rotate 359° to position over your display area
4. Adjust the tilt — Tilt 0–90° to direct the beam at your products or graphic panel
5. Connect power — Plug in, or daisy-chain from the previous unit using the included 1m extension cable
6. Fine-tune on — Power on and make final adjustments to eliminate shadows

Full Technical Specifications

Real-World Installation & Lighting Effect

Shipping & Delivery

• Free Worldwide Shipping via FedEx / DHL Express
• Estimated Delivery: 8–18 Business Days
• Ships to USA, EU, UK, Australia, Canada, and 100+ countries
• Minimum Order: 1 unit (bulk pricing available)

Have a trade show deadline? Contact us with your show date. Need bulk pricing? View Wholesale & Volume Pricing.

Frequently Asked Questions

Will this light fit my booth frame?
Yes — all 4 mounting options are included at no extra cost. Use the large clamp for frames up to 55mm, the small clamp for frames up to 31mm, the Dual M8 Bolt-Fix Bracket for frames too thick for the clamp, or the M8 Sliding Block Bracket for frames with a T-slot channel. See full mounting guide →

Can I bring this light on a plane?
Yes. No batteries, no liquids, no hazardous materials — fully airline-compliant for carry-on or checked baggage. Full travel guide: How to Travel with Trade Show Lighting Equipment

Will this work at international trade shows?
Yes. Universal AC85–245V input is compatible with electrical systems in the US, Europe, Asia, and Australia. You only need a plug adapter — no voltage converter required.

Is this light allowed at U.S. convention centers?
Yes. UL and ETL listed — accepted at McCormick Place, LVCC, Javits Center, and all major U.S. venues. Learn more: UL and ETL Certification for Trade Show Lights

How many units can I daisy-chain from one outlet?
Up to 10 units from a single standard outlet — total draw is only 250W. Full guide: How to Connect Multiple Trade Show Booth Lights

How many do I need for a 10×10 booth?
2 lights for standard illumination, 3 for enhanced visibility, 4 for premium coverage. Full guide: How Many Lights Do You Need for a 10×10 Trade Show Booth?

Also searched as: Clip-on Display Light | Clip-on Exhibition Light | Clamp-on Booth Light | Display Clamp Light | Portable Exhibition Arm Light