Epson and Fiery’s Think Big, Print Big open days introduce professional print workflows. Epson’s UK signage guidance includes backlit panels and media settings. For indoor lightbox makers comparing LED sources, this collection focuses on keeping the printed graphic’s setup traceable when approving the complete display.
Keep the media-setting reference with the printed sample
Record the media reference, printer and ink process, and the preset or job settings used for the comparison print. Where a media-setting file is used, retain its identifier with the job record. A setting chosen for another substrate is not automatically a suitable backlit-print reference.
Track print-setting changes separately from LED changes
Assess the accepted print in a representative lightbox with the intended LED layout and power supply. If the media preset or print job changes, mark the new sample clearly and repeat the assembled comparison. Recording only the LED model cannot reproduce a graphic printed with different settings.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a media preset specify the required lightbox LED arrangement?
No. Printer media settings and internal LED layout address different parts of the display. Verify both in the assembled trial. BOOTH LIGHTS modules are internal light sources, not Epson or Fiery printer components; this collection claims no event participation or equipment compatibility.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send lightbox dimensions, backlit-media reference, sample print-setting record and intended power supply to discuss candidates before purchasing.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Epson and Fiery’s Think Big, Print Big open days introduce professional print workflows. Epson’s UK signage guidance includes backlit panels and media settings. For indoor lightbox makers comparing LED sources, this collection focuses on keeping the printed graphic’s setup traceable when approving the complete display.
Keep the media-setting reference with the printed sample
Record the media reference, printer and ink process, and the preset or job settings used for the comparison print. Where a media-setting file is used, retain its identifier with the job record. A setting chosen for another substrate is not automatically a suitable backlit-print reference.
Track print-setting changes separately from LED changes
Assess the accepted print in a representative lightbox with the intended LED layout and power supply. If the media preset or print job changes, mark the new sample clearly and repeat the assembled comparison. Recording only the LED model cannot reproduce a graphic printed with different settings.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a media preset specify the required lightbox LED arrangement?
No. Printer media settings and internal LED layout address different parts of the display. Verify both in the assembled trial. BOOTH LIGHTS modules are internal light sources, not Epson or Fiery printer components; this collection claims no event participation or equipment compatibility.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send lightbox dimensions, backlit-media reference, sample print-setting record and intended power supply to discuss candidates before purchasing.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.