Searching for ECTRIMS lightbox LED modules or LED bars for a pharmaceutical stand headline? Compare internal sources for illuminated brand names and logos.
Which LEDs suit an ECTRIMS headline brand lightbox?
Match source dimensions and optics to the headline panel, usable depth and mounting spans. Test the real print at its planned mounting height before selecting by wattage.
Will thin logo strokes and name edges stay clear from the aisle?
Check the illuminated face at intended viewing distances and angles. Look for lost fine strokes, bright edges or uneven lettering; test the headline separately from nearby unlit educational graphics.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What headline position, print and power details should I send?
Send name and logo print samples, frame dimensions, depth, mounting spans and height, aisle viewing distance and angles, nearby graphics, site lighting, maintenance access, connectors and supply. Verify wiring and run limits per model. Clinical-lighting suitability and original Sandoz installation fit are not established.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your headline sample and mounting layout to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for ECTRIMS lightbox LED modules or LED bars for a pharmaceutical stand headline? Compare internal sources for illuminated brand names and logos.
Which LEDs suit an ECTRIMS headline brand lightbox?
Match source dimensions and optics to the headline panel, usable depth and mounting spans. Test the real print at its planned mounting height before selecting by wattage.
Will thin logo strokes and name edges stay clear from the aisle?
Check the illuminated face at intended viewing distances and angles. Look for lost fine strokes, bright edges or uneven lettering; test the headline separately from nearby unlit educational graphics.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What headline position, print and power details should I send?
Send name and logo print samples, frame dimensions, depth, mounting spans and height, aisle viewing distance and angles, nearby graphics, site lighting, maintenance access, connectors and supply. Verify wiring and run limits per model. Clinical-lighting suitability and original Sandoz installation fit are not established.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your headline sample and mounting layout to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.