Looking for CleanEx lightbox LED modules or LED bars for a shell scheme stand? Compare internal sources for an illuminated backwall beside non-lit side graphics.
Which LED bars fit a shell scheme lightbox?
Match source dimensions and optics to the printed face, usable lightbox depth and mounting space. Check the assembled frame against the actual shell scheme clearance, including access for wiring and assembly.
Can I reuse the LEDs in a smaller lightbox?
Changing frame size may change source spacing, wiring and total load. Compare the original and smaller layouts, then test the actual print in each frame for bright spots and dark areas. Reusing the frame does not establish that its LEDs can transfer unchanged.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What frame, print and power details should I send?
Send face samples, usable frame depth, mounting spans, shell scheme clearance and assembly access, both planned layouts, connectors and supply. Verify mechanical and electrical fit before choosing replacement sources.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the original and smaller lightbox layouts to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for CleanEx lightbox LED modules or LED bars for a shell scheme stand? Compare internal sources for an illuminated backwall beside non-lit side graphics.
Which LED bars fit a shell scheme lightbox?
Match source dimensions and optics to the printed face, usable lightbox depth and mounting space. Check the assembled frame against the actual shell scheme clearance, including access for wiring and assembly.
Can I reuse the LEDs in a smaller lightbox?
Changing frame size may change source spacing, wiring and total load. Compare the original and smaller layouts, then test the actual print in each frame for bright spots and dark areas. Reusing the frame does not establish that its LEDs can transfer unchanged.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What frame, print and power details should I send?
Send face samples, usable frame depth, mounting spans, shell scheme clearance and assembly access, both planned layouts, connectors and supply. Verify mechanical and electrical fit before choosing replacement sources.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the original and smaller lightbox layouts to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.