Searching for Australian Energy Producers or APPEA lightbox LED modules? Compare internal sources for your own indoor fabric lightbox displaying a printed project map.
Which LEDs should I use behind a printed project map?
Compare edge-lit and rear-backlight layouts using the actual map print. Test fine route lines, small labels and pale background areas in the proposed frame at the intended viewing distance.
Can these modules serve industrial-site lighting?
These are display-lightbox components. The featured rigid bar is IP20 for indoor use; no hazardous-area or outdoor-site lighting approval is claimed. Specify the printed exhibition display separately.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for a map-lightbox enquiry?
Send the frame section, usable depth, map-print material and a sample with fine lines and labels, plus supply details. Verify fit and source spacing for your own build.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with your map sample and lightbox dimensions to compare suitable source layouts.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Searching for Australian Energy Producers or APPEA lightbox LED modules? Compare internal sources for your own indoor fabric lightbox displaying a printed project map.
Which LEDs should I use behind a printed project map?
Compare edge-lit and rear-backlight layouts using the actual map print. Test fine route lines, small labels and pale background areas in the proposed frame at the intended viewing distance.
Can these modules serve industrial-site lighting?
These are display-lightbox components. The featured rigid bar is IP20 for indoor use; no hazardous-area or outdoor-site lighting approval is claimed. Specify the printed exhibition display separately.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for a map-lightbox enquiry?
Send the frame section, usable depth, map-print material and a sample with fine lines and labels, plus supply details. Verify fit and source spacing for your own build.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Contact us with your map sample and lightbox dimensions to compare suitable source layouts.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.