Looking for AHR Expo lightbox LED modules? Compare internal LED bars for a reusable frame with translucent printed graphics.
Which LEDs suit a reusable graphic lightbox?
Compare edge lighting and rear backlighting using lit dimensions, clear depth, front material and mounting spans. Check the actual frame before choosing a source.
Do I need new LEDs when I change the graphic?
A new graphic alone does not require new LEDs. Test its brightness and contrast with the existing source; different ink coverage or material can change the result. Reassess layout if the lit dimensions change.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for LED selection?
Send the replacement print sample, frame dimensions, clear depth, mounting drawing and existing LED, connector and power labels. Calculate the selected source load.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your reused frame and new graphic details to review a suitable internal light source.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for AHR Expo lightbox LED modules? Compare internal LED bars for a reusable frame with translucent printed graphics.
Which LEDs suit a reusable graphic lightbox?
Compare edge lighting and rear backlighting using lit dimensions, clear depth, front material and mounting spans. Check the actual frame before choosing a source.
Do I need new LEDs when I change the graphic?
A new graphic alone does not require new LEDs. Test its brightness and contrast with the existing source; different ink coverage or material can change the result. Reassess layout if the lit dimensions change.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for LED selection?
Send the replacement print sample, frame dimensions, clear depth, mounting drawing and existing LED, connector and power labels. Calculate the selected source load.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your reused frame and new graphic details to review a suitable internal light source.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.