Looking for ACDM Conference lightbox LED modules? Compare internal LED bars for your own freestanding printed display. The organizer’s exhibition information permits lightboxes among its flat-panel stand options; confirm the current stand rules separately.
Do I need a backlit lightbox or an unlit pop-up display?
A non-lit printed banner does not require internal LED modules. For a lightbox, specify a translucent printed face and space for the sources, wiring and mounting. Confirm the graphic material with your printer before choosing the LED layout; opaque artwork cannot be made backlit simply by adding more LEDs.
Which LED bars suit the depth of my freestanding lightbox?
Measure usable internal depth, face size and mounting clearance. Compare edge-directed and rear-facing sources using the verified specifications below. Test the actual printed face for bright bands and dark areas before fixing spacing and quantity; an open stand layout does not determine the lightbox’s optical design.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can a lightbox LED bar illuminate an ordinary roller banner?
These modules are internal lightbox sources. An opaque roller banner needs a different lighting arrangement. If you choose a backlit display, check its frame, translucent face and electrical system together rather than placing loose bars behind an unsuitable print.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your frame section, usable depth, printed-face dimensions and material through Contact us for a source comparison.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
Looking for ACDM Conference lightbox LED modules? Compare internal LED bars for your own freestanding printed display. The organizer’s exhibition information permits lightboxes among its flat-panel stand options; confirm the current stand rules separately.
Do I need a backlit lightbox or an unlit pop-up display?
A non-lit printed banner does not require internal LED modules. For a lightbox, specify a translucent printed face and space for the sources, wiring and mounting. Confirm the graphic material with your printer before choosing the LED layout; opaque artwork cannot be made backlit simply by adding more LEDs.
Which LED bars suit the depth of my freestanding lightbox?
Measure usable internal depth, face size and mounting clearance. Compare edge-directed and rear-facing sources using the verified specifications below. Test the actual printed face for bright bands and dark areas before fixing spacing and quantity; an open stand layout does not determine the lightbox’s optical design.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can a lightbox LED bar illuminate an ordinary roller banner?
These modules are internal lightbox sources. An opaque roller banner needs a different lighting arrangement. If you choose a backlit display, check its frame, translucent face and electrical system together rather than placing loose bars behind an unsuitable print.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your frame section, usable depth, printed-face dimensions and material through Contact us for a source comparison.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.