Planning an indoor fabric lightbox after Warsaw Print-Tech Expo? Compare all 26 LED Modules products, but approve the graphic material before committing to an LED layout. A textile suitable for an unlit frame does not automatically meet a backlit specification.
Specify the fabric's lighting application
Integart's material catalogue identifies Lumina FR for backlit applications and Display FR for non-illuminated frame systems. Use the exact supplier product code and printing process in your purchase specification. The event connection supports this procurement topic; it does not establish the fabric or LED system available at a future stand.
Compare LED bars for the approved printed fabric
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can ordinary display fabric be used in an LED lightbox?
Do not approve a fabric from its polyester description alone. Ask whether it is intended for backlighting, then test the final printed and finished sample in your actual frame. Check light transmission, dense ink areas, pale regions and visible weave under the selected fixed CCT.
Will more LED power correct a poor fabric choice?
More source output does not establish suitable transmission or uniformity. Keep the same approved graphic while testing bar positions, frame depth and reflective surfaces. Compare edge-lit and rear-backlit layouts separately; do not accept a brighter empty-frame photograph as proof of the finished face.
What should a fabric-and-LED order include?
Record the textile code, batch or roll identity, printable side, printing process, finished size and approved sample reference. On delivery, reconcile those identifiers before comparing an illuminated sample with the approved print under the same LED model, CCT and layout. Send these details, the frame section, connector and driver plan to request a component quotation.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W/18W LED Module for MODULAP Fabric Lightbox -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
Side-Lit LED Module for MODULAP Systems -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Planning an indoor fabric lightbox after Warsaw Print-Tech Expo? Compare all 26 LED Modules products, but approve the graphic material before committing to an LED layout. A textile suitable for an unlit frame does not automatically meet a backlit specification.
Specify the fabric's lighting application
Integart's material catalogue identifies Lumina FR for backlit applications and Display FR for non-illuminated frame systems. Use the exact supplier product code and printing process in your purchase specification. The event connection supports this procurement topic; it does not establish the fabric or LED system available at a future stand.
Compare LED bars for the approved printed fabric
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can ordinary display fabric be used in an LED lightbox?
Do not approve a fabric from its polyester description alone. Ask whether it is intended for backlighting, then test the final printed and finished sample in your actual frame. Check light transmission, dense ink areas, pale regions and visible weave under the selected fixed CCT.
Will more LED power correct a poor fabric choice?
More source output does not establish suitable transmission or uniformity. Keep the same approved graphic while testing bar positions, frame depth and reflective surfaces. Compare edge-lit and rear-backlit layouts separately; do not accept a brighter empty-frame photograph as proof of the finished face.
What should a fabric-and-LED order include?
Record the textile code, batch or roll identity, printable side, printing process, finished size and approved sample reference. On delivery, reconcile those identifiers before comparing an illuminated sample with the approved print under the same LED model, CCT and layout. Send these details, the frame section, connector and driver plan to request a component quotation.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.