10W LED Module Light Bar for Lightbox – DC24V, CRI90+, UL/ETL Listed

Uniform, hotspot-free illumination for fabric lightboxes and backlit displays.

This 10W LED bar light is a professional-grade rigid strip light and edge light designed for side-lit lightbox installation. As a compact bar light for exhibition and trade show displays, it mounts along the inner frame edges to illuminate fabric panels evenly from the sides — delivering 1100lm output, CRI 90+, and a 9×50° transparent lens for precise light distribution. DC24V input, linkable up to 6 modules per run. UL and ETL listed.

Perfect for:

• Trade show fabric lightboxes and SEG displays
• Exhibition booth backlit panels
• Retail backlit signage and display cases
• Pop-up display and portable lightbox systems
• MODULAP, Expolinc, and standard aluminum frame lightboxes

Specifications

What's Included

• LED Module Light Bars (quantity per pack size selected)
• Connector: 5557 Plug
• 2 × Spring-loaded M4 mounting hardware sets per module

Pack Size Guide

Note: DC24V driver not included. Contact us if you need driver recommendations for your lightbox size.

Key Features

Side-Lit Design — Hotspot-Free Uniformity

9×50° lens directs light inward across the fabric panel. Space modules no more than 40cm apart for seamless, even illumination with no bright spots.

CRI 90+ — True Color on Fabric Graphics

Printed graphics and brand colors appear accurate and vivid. Essential for fashion, cosmetics, and premium brand displays.

Linkable — Up to 6 Modules per Run

Daisy-chain up to 6 modules from a single DC24V driver. Simplifies wiring inside the frame with minimal cable management.

Easy Installation — Screw Mount or Adhesive Backing

Peel-and-stick adhesive backing or screw mount — installs directly onto the inner frame edge in seconds.

Frequently Asked Questions

Why does a lightbox LED module need a directional lens? What happens without one?

Without a directional lens, LED light scatters in all directions — most of it is wasted on the frame walls and housing rather than reaching the fabric panel. The result is a lightbox that is noticeably brighter near the edges where the modules are mounted and darker toward the center, creating uneven illumination that makes graphics look unprofessional under show floor conditions.

The 9×50° transparent lens on this module concentrates and directs all usable light in a single controlled beam aimed inward across the fabric panel. This maximizes light efficiency, eliminates edge hotspots, and produces the uniform, edge-to-edge brightness that professional SEG fabric lightboxes require. The lens is the critical component that separates a professional-grade lightbox module from a generic LED strip.

What type of lightbox is this LED bar designed for?

This 10W LED module light bar is designed specifically for SEG (Silicone Edge Graphics) fabric lightboxes and standard aluminum frame lightboxes used in trade shows and exhibitions. It mounts along the inner frame edge as a side-lit module, illuminating the fabric panel evenly from the sides without hotspots.

How many LED modules can be linked together on one driver?

Up to 6 modules can be daisy-chained per run from a single DC24V driver. This means a single driver can power a complete small-to-medium lightbox frame without additional wiring runs.

What connector does this module use?

This module uses a 5557 plug connector, which supports tool-free daisy-chain connections between modules. The short 3–6.5cm cable allows neat routing inside the lightbox frame.

Does this LED bar work with MODULAP or Expolinc lightbox systems?

Yes. This module is compatible with MODULAP, Expolinc, and most standard aluminum profile SEG lightbox frames. It can be mounted using either the adhesive backing or screw mount, depending on the frame design.

What certifications does this LED lightbox module carry?

This module is certified UL, ETL, CE, RoHS, SAA, and UKCA — making it compliant for professional use at major trade show venues in the US, EU, UK, and Australia, including venues that require UL or ETL listing for electrical equipment.

Is a DC24V driver included with the purchase?

No. The DC24V driver is sold separately. The required driver wattage depends on the number of modules per run — for 6 linked modules at 10W each, a minimum 65W DC24V driver is recommended. Contact us for driver recommendations based on your lightbox size.

Also Consider

Need higher output for larger MODULAP or SEG lightbox frames? The BL009 12W LED Backlit Module with Plug-In Connector delivers 1320lm with a plug-in Molex-style quick-connect — ideal for professional exhibit builders working with MODULAP systems.

Shipping & Delivery

• ✅ Ships within 2–5 business days of order confirmation
• ✅ Customs-friendly commercial invoice included
• ✅ Factory direct — no middleman markup

Not sure how many modules you need? Contact us with your lightbox dimensions and we'll recommend the right quantity. Need bulk pricing? View Wholesale & Volume Pricing.