Buying exhibition lights, SEG lightbox modules or an LED power supply? Start with the destination and exact model. Similar-looking logos can represent different things: a manufacturer’s declaration, independent safety certification, electromagnetic compatibility or restrictions on hazardous substances.
The illustrations below are identification examples for education. They do not certify BOOTH LIGHTS products. Check each model’s actual label and supporting documents.
Clear examples of lighting marks
Open an image to inspect it at full size. A mark’s surrounding letters, numbers and certification scope matter; the abbreviation alone is not enough.
Mark, certificate, test report or declaration?
- A product mark identifies a conformity or certification scheme. Check the full label, including any country indicators and file or control number.
- A certificate records a certification body’s decision for the models and scope stated in it. Check the issuer’s verification service and current status.
- A test report records the sample, test methods and results. Testing one sample does not automatically establish ongoing product certification.
- A Declaration of Conformity is the responsible party’s formal statement against applicable legislation. It is different from a laboratory’s test report.
Europe and the EEA: CE, EMC and RoHS
CE marking indicates the manufacturer declares conformity with applicable EU legislation requiring CE. It is not an EU-issued quality award or proof that an independent body has certified the product. Request the EU Declaration of Conformity, model identification and relevant supporting evidence. EMC concerns electromagnetic emissions and immunity; it is not a universal standalone safety logo. A 24 V DC LED module and its mains-powered supply may have different regulatory scopes. Assess the complete configuration. CE EMC
RoHS restricts hazardous substances in electrical and electronic equipment within its scope. It does not prove electrical safety, light output or service life. A generic green “RoHS” badge is not a single official EU certification mark. Check model-specific compliance evidence and any applicable exemptions. RoHS
UKCA is a conformity marking for Great Britain. Current UK guidance continues to recognise CE for many covered product sectors, including relevant electrical equipment. The applicable route depends on the product and destination; Northern Ireland has different rules. Do not assume every shipment to the UK requires UKCA alone. UKCA / CE
United States and Canada: UL, ETL, CSA and FCC
UL Listed and UL Recognized Component are different. A recognized component is evaluated for use inside a larger product under stated conditions; it is not the same as a listed finished luminaire. UL Classified also has a defined scope. Match the certification entry to the delivered model, ratings and use. UL
ETL Listed is Intertek’s product safety certification mark. CSA also provides product certification. Country indicators identify US and/or Canadian coverage. For relevant US workplace equipment, verify the laboratory’s OSHA NRTL recognition and the applicable standard within its scope. UL is not the only recognised laboratory. Confirm acceptance with the venue or electrical contractor before shipment. ETL CSA OSHA NRTL
FCC rules address radiofrequency emissions and equipment authorisation, not general electrical safety. The route depends on the electronics and any wireless functions; an FCC logo alone does not establish the required authorisation. It cannot replace a safety listing. FCC
European independent safety marks: GS, VDE, ENEC and TÜV
GS means “Geprüfte Sicherheit” (tested safety). It is a voluntary mark regulated under Germany’s Product Safety Act. It is issued by an authorised GS body for the stated product and is different from CE. Do not treat GS as mandatory for every light sold in Germany. GS / BAuA
VDE and ENEC identify certification schemes with defined standards and surveillance. ENEC covers luminaires and associated components, among other products. TÜV names identify testing and certification organisations; there is no single universal “TÜV certificate” required for every German sale. Check the exact mark, scheme, certificate ID and model. VDE ENEC
Japan: diamond and circular PSE
PSE applies to products covered by Japan’s Electrical Appliances and Materials Safety Act. The diamond and circular forms identify different regulated product categories, with different conformity procedures. PSE is not simply a logo issued by JET for all electronics. Check classification, the responsible business and required local contact details and the complete required label for the particular luminaire or power supply. PSE / METI
Australia and New Zealand: RCM, SAA and old C-Tick
RCM is the Regulatory Compliance Mark. Australian requirements can involve ACMA rules and, for in-scope equipment in participating jurisdictions, EESS electrical safety obligations. Check the local responsible supplier, evidence and registration where required. New Zealand’s applicable obligations must also be checked. C-Tick is a legacy Australian label; do not use an old C-Tick claim as the current procurement checklist. RCM / ACMA EESS
SAA Approvals is a certification body; “SAA certification” is not the name of all Australian electrical law. An electrical safety certificate alone does not complete every RCM obligation. Match the certificate to the model and confirm the other applicable requirements with the local supplier. SAA Approvals
Saudi Arabia: SASO, SABER and shipment documents
SASO is the Saudi Standards, Metrology and Quality Organization. SABER supports product conformity and shipment procedures; neither name alone is a universal product approval logo. For LED lighting, the importer should check the HS classification and applicable technical regulations, then arrange the required product and shipment documentation. A CE or RoHS document does not automatically replace Saudi requirements. Confirm the current route before shipping. SASO SABER
IECEE CB Scheme: useful evidence, not a worldwide sales permit
The CB Scheme supports acceptance of CB Test Certificates and associated test reports between participating certification bodies. National differences and additional requirements may still apply. Request both documents for the exact model; a CB certificate does not automatically authorise sales in every country. IECEE CB / Intertek
Other names and historical labels in older guides
CCC is China’s compulsory certification scheme for products in its current catalogue. CQC also operates voluntary product certification. Neither replaces the destination country’s requirements. CQC
CCEE (“Great Wall”) and CCIB are historical Chinese schemes. Treat their old marks as historical references, not evidence of current market approval.
PCT/РСТ and GOST references occur in older Russian documentation. GOST is also a family of standards. Current requirements may involve EAEU technical regulations and EAC, or national rules, depending on the product. An old GOST/PCT reference is not a universal import permit. EAEU
MPR II and early TCO labels concern computer-display history. Today’s TCO Certified addresses sustainability of IT products and has updated criteria. They are not general LED luminaire safety approvals. Do not reuse the old guide’s claims that TCO03 is the latest version or that monitor luminance is measured in lumens. TCO Certified
Before ordering: a short procurement checklist
- Specify the destination country, venue and whether you are buying a finished luminaire, LED module, power supply or assembled lightbox.
- Match the model, manufacturer, voltage and ratings on the quotation, product label and documents. Check the issuer’s directory and any limitations.
- Confirm whether certification covers the complete product or only a component. Review the intended environment, supply, cables, installation and mounting separately.
- Send the relevant documents to your importer, organiser or electrical contractor before shipment. Keep the confirmed model list with the order.
Questions buyers often ask
Does CE mean a light is UL or ETL Listed?
No. These are different conformity and certification systems. Verify the required evidence for the destination and installation.
Does a certified power supply certify the whole lightbox?
No. Its certification covers its stated scope. The modules, wiring, enclosure and completed assembly need their own applicable assessment.
Does RoHS prove electrical safety?
No. RoHS concerns restricted substances. Electrical safety and electromagnetic compatibility are separate subjects.
Does a product need every mark shown here?
No. Applicability depends on the product, market and use. Ask for the relevant documents, rather than counting logos.
Choose lighting with the right documentation
Compare LED exhibition lighting for front illumination and LED lightbox modules for internal lightbox lighting. Select mounting systems by frame fit and load requirements. To discuss an order, contact BOOTH LIGHTS with the product link, quantity, destination, supply details and any venue document requirements. We can review the available documentation for the proposed model before you order.
For electrical and installation pictograms such as Class II, Class III and protective earth, see our illustrated lighting symbols guide.
Official references and verification
Reviewed against the references below on 10 October 2026. This guide explains how to read documents; the exact product classification and current destination rules determine the required conformity route. Marks belong to their respective owners.