Select internal LED components for an independently built logo lightbox for UNImotion. For a sign above an exhibit wall, compare the illuminated logo from the visitor’s viewing position before ordering the full production quantity.
Test the logo with the surrounding light
Use the actual transmitting face, print and enclosure. Compare the logo with the lightbox off and on, under the intended ambient light, from the same viewing position. Record white areas, coloured graphics and thin lettering; a bright test bench alone does not establish a readable raised sign.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Will internal LED bars reproduce the hall’s coloured lighting?
These bars illuminate the lightbox face. They are not the surrounding architectural lighting or its controller. Choose the exact fixed-CCT version or the dual-CCT pair and compatible separate control. Ambient colour can alter the apparent graphic colour; test the complete sign in that setting.
Does a higher sign always need higher-output LED bars?
Viewing height does not determine the cabinet layout. Check usable internal space, face material, source-to-face distance and the candidate’s beam. More lumens alone do not establish logo contrast or uniformity. Approve an illuminated sample at the real viewing angle.
What information helps select logo-lightbox components?
Send the illuminated opening, cabinet depth, face sample, mounting-space drawing and intended viewing position. Include candidate bar links, chosen CCT, trial quantity and driver information. Keep component selection separate from the stand’s structural and rigging approval.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
Side-Lit LED Module for MODULAP Systems -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Select internal LED components for an independently built logo lightbox for UNImotion. For a sign above an exhibit wall, compare the illuminated logo from the visitor’s viewing position before ordering the full production quantity.
Test the logo with the surrounding light
Use the actual transmitting face, print and enclosure. Compare the logo with the lightbox off and on, under the intended ambient light, from the same viewing position. Record white areas, coloured graphics and thin lettering; a bright test bench alone does not establish a readable raised sign.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Will internal LED bars reproduce the hall’s coloured lighting?
These bars illuminate the lightbox face. They are not the surrounding architectural lighting or its controller. Choose the exact fixed-CCT version or the dual-CCT pair and compatible separate control. Ambient colour can alter the apparent graphic colour; test the complete sign in that setting.
Does a higher sign always need higher-output LED bars?
Viewing height does not determine the cabinet layout. Check usable internal space, face material, source-to-face distance and the candidate’s beam. More lumens alone do not establish logo contrast or uniformity. Approve an illuminated sample at the real viewing angle.
What information helps select logo-lightbox components?
Send the illuminated opening, cabinet depth, face sample, mounting-space drawing and intended viewing position. Include candidate bar links, chosen CCT, trial quantity and driver information. Keep component selection separate from the stand’s structural and rigging approval.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.