Building SEG fabric lightbox panels or towers around a Toronto International Boat Show dealer display? Compare internal LED bars for printed brand and model graphics. All 26 Modules products are available below.
Where should lightbox graphics sit around the boats?
Review the floor plan from the visitor's approach. Check that graphics remain visible beside hulls, access steps and demonstration areas. Test printed blue-water images and white boat details in the actual frame, including corners and seams.
How can towers and accent panels be rebuilt reliably?
Measure each frame section separately and label matching LED runs, connectors and graphic positions. Check cable exit paths and driver access before packing. Reassemble one complete panel to test uniformity and confirm that connections remain accessible.
Compare LED lightbox sources
- Linkable edge-lit bars: DC24V, 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
- 20W rigid edge-lit bar: DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics.
Are these boat navigation lights or waterproof marine LEDs?
These are internal display-lightbox components, not vessel lighting. An indoor boat-show setting does not establish waterproofing or compatibility with a boat's electrical system. Confirm the chosen model's rating and approved supply.
Before ordering
Featured bars need separate DC24V constant-voltage supplies. Verify total load, polarity, connector pinout and cable routing. Only the featured linkable family lists up to five compatible bars per run, subject to cable and load checks; other models have their own requirements.
Send the display plan, frame-section dimensions, fabric samples and assembly sequence for a sample layout and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Building SEG fabric lightbox panels or towers around a Toronto International Boat Show dealer display? Compare internal LED bars for printed brand and model graphics. All 26 Modules products are available below.
Where should lightbox graphics sit around the boats?
Review the floor plan from the visitor's approach. Check that graphics remain visible beside hulls, access steps and demonstration areas. Test printed blue-water images and white boat details in the actual frame, including corners and seams.
How can towers and accent panels be rebuilt reliably?
Measure each frame section separately and label matching LED runs, connectors and graphic positions. Check cable exit paths and driver access before packing. Reassemble one complete panel to test uniformity and confirm that connections remain accessible.
Compare LED lightbox sources
- Linkable edge-lit bars: DC24V, 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° optics.
- 7W compact edge-lit bar: DC24V, 200×23×16mm, 770lm; standard 20°×60° optics.
- 20W rigid edge-lit bar: DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics.
Are these boat navigation lights or waterproof marine LEDs?
These are internal display-lightbox components, not vessel lighting. An indoor boat-show setting does not establish waterproofing or compatibility with a boat's electrical system. Confirm the chosen model's rating and approved supply.
Before ordering
Featured bars need separate DC24V constant-voltage supplies. Verify total load, polarity, connector pinout and cable routing. Only the featured linkable family lists up to five compatible bars per run, subject to cable and load checks; other models have their own requirements.
Send the display plan, frame-section dimensions, fabric samples and assembly sequence for a sample layout and quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.