Looking for The Running Event lightbox LED modules or LED bars for sports nutrition booth backdrops? Compare internal sources for illuminated printed pack artwork, athlete images and brand text.
Which LED modules suit a nutrition-product backdrop lightbox?
Compare edge-lit bars and rear-backlight bars with the actual printed graphic, inner frame dimensions, usable depth and mounting spans. Source length, optics and spacing depend on the build. These are internal components; frame, print and tabletop product lighting are separate.
How do I check pack graphics and text from the aisle and close up?
Test the approved print under planned venue lighting from the aisle and the intended close viewing position. Check that bright pack illustrations do not wash out smaller text and that darker athlete-image areas remain readable. Review edges and the center before fixing source placement; do not assume a lens or wattage guarantees even illumination.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print, frame and power details should I send?
Send approved print samples, illuminated face size, internal depth, mounting spans, viewing distances, service access, connectors and supply. Check source spacing and the actual print before ordering. Existing portable lightbox frames need compatibility checks; these LED bars do not include the frame, print or counter lighting.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your approved nutrition-product artwork and frame details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for The Running Event lightbox LED modules or LED bars for sports nutrition booth backdrops? Compare internal sources for illuminated printed pack artwork, athlete images and brand text.
Which LED modules suit a nutrition-product backdrop lightbox?
Compare edge-lit bars and rear-backlight bars with the actual printed graphic, inner frame dimensions, usable depth and mounting spans. Source length, optics and spacing depend on the build. These are internal components; frame, print and tabletop product lighting are separate.
How do I check pack graphics and text from the aisle and close up?
Test the approved print under planned venue lighting from the aisle and the intended close viewing position. Check that bright pack illustrations do not wash out smaller text and that darker athlete-image areas remain readable. Review edges and the center before fixing source placement; do not assume a lens or wattage guarantees even illumination.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What print, frame and power details should I send?
Send approved print samples, illuminated face size, internal depth, mounting spans, viewing distances, service access, connectors and supply. Check source spacing and the actual print before ordering. Existing portable lightbox frames need compatibility checks; these LED bars do not include the frame, print or counter lighting.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your approved nutrition-product artwork and frame details to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.