Searching for The Car Wash Show lightbox LED modules or LED bars for double-sided QR-code graphics? Compare internal sources for corner lightboxes on car-wash technology stands.
Which LEDs suit double-sided corner lightboxes?
Match dimensions and optics to both graphics, usable depth and mounting spans. Compare face spacing and any internal divider with the actual assembly before choosing the lighting layout.
Will the QR code scan on each illuminated face?
Test both real graphics on representative phones at planned distances and angles with intended brightness. Check contrast, uniformity and the linked destination; successful scanning on one face does not confirm the other.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What face, scan-distance and power details should I send?
Send both graphics, QR dimensions and destinations, scan distances and angles, face spacing and divider plan, depth, mounting spans, connector access and supply. Verify model-specific wiring limits. These are graphic lightbox LEDs; scanning, camera-system fit and use in wet car-wash equipment are not established.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send both faces and your QR scan-test plan to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Searching for The Car Wash Show lightbox LED modules or LED bars for double-sided QR-code graphics? Compare internal sources for corner lightboxes on car-wash technology stands.
Which LEDs suit double-sided corner lightboxes?
Match dimensions and optics to both graphics, usable depth and mounting spans. Compare face spacing and any internal divider with the actual assembly before choosing the lighting layout.
Will the QR code scan on each illuminated face?
Test both real graphics on representative phones at planned distances and angles with intended brightness. Check contrast, uniformity and the linked destination; successful scanning on one face does not confirm the other.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What face, scan-distance and power details should I send?
Send both graphics, QR dimensions and destinations, scan distances and angles, face spacing and divider plan, depth, mounting spans, connector access and supply. Verify model-specific wiring limits. These are graphic lightbox LEDs; scanning, camera-system fit and use in wet car-wash equipment are not established.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send both faces and your QR scan-test plan to compare suitable sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.