SloanLED offers customer-location training for signmaking teams. This independent selection helps indoor-lightbox builders prepare electrical requirements for BOOTH LIGHTS components.
Write an electrical requirements sheet before choosing a module
Record the exact module model, rated DC voltage, quantity, connector pinout and polarity. Use its actual wattage to plan the driver load and cable arrangement. A connector that fits does not prove electrical compatibility; check the complete circuit before energising a sample.
Separate white-light selection from control requirements
Decide whether the project needs fixed white light or the selected dual-CCT model. Describe the intended switching or dimming method when asking for a quote. Do not infer DALI, DMX, addressable RGB or controller compatibility from an LED module name.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a BOOTH LIGHTS module purchase include SloanLED partner status?
No. This collection supplies independent component choices. Supplier training access, partner status and warranty conditions must be confirmed with SloanLED. These products are not presented as authorised SloanLED replacements.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the indoor-lightbox drawing, exact module quantity, cable route and control requirements for a model-specific sample discussion.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
SloanLED offers customer-location training for signmaking teams. This independent selection helps indoor-lightbox builders prepare electrical requirements for BOOTH LIGHTS components.
Write an electrical requirements sheet before choosing a module
Record the exact module model, rated DC voltage, quantity, connector pinout and polarity. Use its actual wattage to plan the driver load and cable arrangement. A connector that fits does not prove electrical compatibility; check the complete circuit before energising a sample.
Separate white-light selection from control requirements
Decide whether the project needs fixed white light or the selected dual-CCT model. Describe the intended switching or dimming method when asking for a quote. Do not infer DALI, DMX, addressable RGB or controller compatibility from an LED module name.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does a BOOTH LIGHTS module purchase include SloanLED partner status?
No. This collection supplies independent component choices. Supplier training access, partner status and warranty conditions must be confirmed with SloanLED. These products are not presented as authorised SloanLED replacements.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the indoor-lightbox drawing, exact module quantity, cable route and control requirements for a model-specific sample discussion.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.