SIGN CHINA covers signage, lightboxes, LED lighting and printed displays for international buyers. Compare internal lightbox sources by their mounting plane and optical role. Browse all LED Modules below; these sources are separate from LED video-display modules.
Identify the lighting arrangement before comparing bars
For side lighting, record the frame edge, lens direction and light path across the graphic. For direct backlighting, record the rear mounting plane and distance to the printed face. Trial the actual frame and graphic; beam angle alone does not determine suitable spacing or finished uniformity.
Keep the dual-CCT rear source in its intended role
The featured dual-CCT bar uses direct backlighting rather than edge lighting. Confirm its white-light pair and separate compatible control. Compare it with edge-lit bars only as alternative complete layouts, not as a direct substitution in the same mounting position.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are lightbox LED sources interchangeable with LED video-display modules?
No. These products illuminate a separate printed face; they do not generate a pixel image. Specify the lightbox structure, optical direction and control requirements before selecting components.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the frame section, lighting arrangement, rear clearance, printed material, desired white-light pair and quantity through our contact page for component selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens
SIGN CHINA covers signage, lightboxes, LED lighting and printed displays for international buyers. Compare internal lightbox sources by their mounting plane and optical role. Browse all LED Modules below; these sources are separate from LED video-display modules.
Identify the lighting arrangement before comparing bars
For side lighting, record the frame edge, lens direction and light path across the graphic. For direct backlighting, record the rear mounting plane and distance to the printed face. Trial the actual frame and graphic; beam angle alone does not determine suitable spacing or finished uniformity.
Keep the dual-CCT rear source in its intended role
The featured dual-CCT bar uses direct backlighting rather than edge lighting. Confirm its white-light pair and separate compatible control. Compare it with edge-lit bars only as alternative complete layouts, not as a direct substitution in the same mounting position.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are lightbox LED sources interchangeable with LED video-display modules?
No. These products illuminate a separate printed face; they do not generate a pixel image. Specify the lightbox structure, optical direction and control requirements before selecting components.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the frame section, lighting arrangement, rear clearance, printed material, desired white-light pair and quantity through our contact page for component selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.