Looking for LED modules for a printed fabric lightbox at Screen Print India? Start with the actual soft-signage fabric: a garment textile or blackout banner may behave very differently under rear illumination.
Choose the textile before increasing LED power
The organizer separates Screen Print India into Textile and Industrial; its Textile information includes soft signage. This guide addresses fabric lightboxes, not garment printing or the Industrial zone within Media Expo. Test the finished fabric in its intended frame with DC24V LED bars.
Compare LED Modules for your test frame
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can I illuminate any printed textile?
No. Ask the media supplier whether it is intended for backlit use. A black backing can block light; an open weave may show points of light. More LED power does not change an opaque fabric into a translucent graphic.
Why does the weave show when the LEDs are on?
Compare the same printed sample and mounting tension at the intended viewing distance. Check light-to-fabric spacing and any diffuser before changing bars; do not judge a textile only from its unlit appearance.
What should I send for a lightbox LED quotation?
Send the fabric reference, a lit and unlit sample photo, frame opening and depth, bar mounting positions, and existing driver and connector details. Confirm polarity and DC24V supply; trial the approved assembly before ordering repeated sets.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W/18W LED Module for MODULAP Fabric Lightbox -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
Side-Lit LED Module for MODULAP Systems -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Looking for LED modules for a printed fabric lightbox at Screen Print India? Start with the actual soft-signage fabric: a garment textile or blackout banner may behave very differently under rear illumination.
Choose the textile before increasing LED power
The organizer separates Screen Print India into Textile and Industrial; its Textile information includes soft signage. This guide addresses fabric lightboxes, not garment printing or the Industrial zone within Media Expo. Test the finished fabric in its intended frame with DC24V LED bars.
Compare LED Modules for your test frame
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Can I illuminate any printed textile?
No. Ask the media supplier whether it is intended for backlit use. A black backing can block light; an open weave may show points of light. More LED power does not change an opaque fabric into a translucent graphic.
Why does the weave show when the LEDs are on?
Compare the same printed sample and mounting tension at the intended viewing distance. Check light-to-fabric spacing and any diffuser before changing bars; do not judge a textile only from its unlit appearance.
What should I send for a lightbox LED quotation?
Send the fabric reference, a lit and unlit sample photo, frame opening and depth, bar mounting positions, and existing driver and connector details. Confirm polarity and DC24V supply; trial the approved assembly before ordering repeated sets.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.