Looking for PHTM Expo lightbox LED modules or LED bars for printed exhibition light towers? Compare internal light sources for paper graphics and clear printed faces with white-ink layers.
Which LEDs suit a printed exhibition lightbox tower?
Compare edge-lit and rear-backlight options using the actual face, ink coverage, usable depth and internal supports. Test the full printed face before approving source positions; the tower name alone does not establish LED compatibility.
Can paper and clear graphics use the same LED arrangement?
Do not assume they can. Paper weight and ink coverage affect diffusion and transmitted light; clear substrates with white-ink layers need their own finished-print test. Compare both prints in the proposed enclosure before reusing a source layout.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What graphic layers and tower section details should I send?
Send the face material and white-ink layers, final graphic, dimensions, depth, supports and mounting space, plus access, connectors and supply details. Our modules are internal sources for a verified build, not a complete tower or a guaranteed replacement for an existing battery-powered system.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your printed lightbox tower details to compare sources for the actual graphic.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for PHTM Expo lightbox LED modules or LED bars for printed exhibition light towers? Compare internal light sources for paper graphics and clear printed faces with white-ink layers.
Which LEDs suit a printed exhibition lightbox tower?
Compare edge-lit and rear-backlight options using the actual face, ink coverage, usable depth and internal supports. Test the full printed face before approving source positions; the tower name alone does not establish LED compatibility.
Can paper and clear graphics use the same LED arrangement?
Do not assume they can. Paper weight and ink coverage affect diffusion and transmitted light; clear substrates with white-ink layers need their own finished-print test. Compare both prints in the proposed enclosure before reusing a source layout.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What graphic layers and tower section details should I send?
Send the face material and white-ink layers, final graphic, dimensions, depth, supports and mounting space, plus access, connectors and supply details. Our modules are internal sources for a verified build, not a complete tower or a guaranteed replacement for an existing battery-powered system.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your printed lightbox tower details to compare sources for the actual graphic.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.