Sourcing Photonics West lightbox LED modules for a modular pavilion? Compare neighboring illuminated graphics together before choosing bars for each section. These sources are for exhibit branding, not optical calibration instruments.
How do I keep neighboring pavilion lightboxes visually consistent?
Use actual printed-front samples and a common white-light target to compare the sections together. Check the selected models' CCT, optics and output, plus each enclosure's depth and source spacing. The same print file alone does not establish the same illuminated result. Keep blockout storage graphics outside the internal-lightbox component count.
Can different LED bar models share one pavilion lighting plan?
Different models may suit different enclosure sections, but confirm their visual result with the final fronts before approving them together. Do not mix bars just because the connectors look alike. Verify voltage, pinout, polarity, load and each model's wiring limits separately. A long pavilion perimeter is not permission to build one continuous electrical run or to modify a supplier's rental frame.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for a multi-section lightbox component order?
Label each illuminated section and send its front sample, dimensions, clear depth, mounting positions and supply labels. Include a comparison of neighboring fronts and explain which graphics are blockout or externally lit. Agree suitable white light and output for the actual prints before calculating quantities. Our featured bars are white-light sources, not RGB or scientific test-lightbox systems.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the section schedule and actual front samples to compare suitable internal bars and request a component quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Sourcing Photonics West lightbox LED modules for a modular pavilion? Compare neighboring illuminated graphics together before choosing bars for each section. These sources are for exhibit branding, not optical calibration instruments.
How do I keep neighboring pavilion lightboxes visually consistent?
Use actual printed-front samples and a common white-light target to compare the sections together. Check the selected models' CCT, optics and output, plus each enclosure's depth and source spacing. The same print file alone does not establish the same illuminated result. Keep blockout storage graphics outside the internal-lightbox component count.
Can different LED bar models share one pavilion lighting plan?
Different models may suit different enclosure sections, but confirm their visual result with the final fronts before approving them together. Do not mix bars just because the connectors look alike. Verify voltage, pinout, polarity, load and each model's wiring limits separately. A long pavilion perimeter is not permission to build one continuous electrical run or to modify a supplier's rental frame.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for a multi-section lightbox component order?
Label each illuminated section and send its front sample, dimensions, clear depth, mounting positions and supply labels. Include a comparison of neighboring fronts and explain which graphics are blockout or externally lit. Agree suitable white light and output for the actual prints before calculating quantities. Our featured bars are white-light sources, not RGB or scientific test-lightbox systems.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send the section schedule and actual front samples to compare suitable internal bars and request a component quotation.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.