Looking for Paris Air Show lightbox LED modules for a printed pavilion photograph? Compare internal LED bars for aerospace and space-sector display graphics, and align the print supplier’s sample with the fabricator’s frame drawing before ordering.
Should LED selection follow the digital artwork or the illuminated print?
Use a sample of the final translucent print. A screen preview cannot show how its inks, substrate and backing transmit LED light. Check dark image areas, pale details and transitions with the proposed source position and usable cavity depth. Agree the requested colour temperature before the final trial; extra brightness alone does not correct uneven illumination.
How do I hand one specification to the printer and pavilion fabricator?
Mark the image orientation, visible opening, mounting spans and source-to-face distance on the same drawing. Identify frame members that may cast shadows and the route for graphics replacement. Record the tested LED model and driver arrangement with the print sample, so a change of substrate or frame detail triggers a fresh review rather than an assumed match.
Compare LED lightbox sources
- 20W rigid LED bar — DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics; check the final print and frame section.
- Linkable LED bar — DC24V; 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° lens; confirm a compatible external driver and run limit.
- 7W mini LED bar — DC24V, 200×23×16mm, 770lm, standard 20°×60° lens; compare where mounting spans are shorter.
Which details are needed for a Paris Air Show photo-lightbox quotation?
Send the frame section, face dimensions, print material and sample, required colour temperature, mounting points and service opening. Confirm voltage, connector pinout, polarity and cable rating. Calculate wattage and driver headroom for the exact variants; do not apply one bar’s linking limit to every model.
Before ordering
Plan an accessible compatible external driver and check the assembled display with its actual print. These are components for exhibition lightboxes; fit in another supplier’s pavilion system and final colour appearance need project-specific verification.
Compare all 26 LED Modules below. Send the coordinated print-and-frame brief for help selecting the internal light source.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
Side-Lit LED Module for MODULAP Systems -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
Looking for Paris Air Show lightbox LED modules for a printed pavilion photograph? Compare internal LED bars for aerospace and space-sector display graphics, and align the print supplier’s sample with the fabricator’s frame drawing before ordering.
Should LED selection follow the digital artwork or the illuminated print?
Use a sample of the final translucent print. A screen preview cannot show how its inks, substrate and backing transmit LED light. Check dark image areas, pale details and transitions with the proposed source position and usable cavity depth. Agree the requested colour temperature before the final trial; extra brightness alone does not correct uneven illumination.
How do I hand one specification to the printer and pavilion fabricator?
Mark the image orientation, visible opening, mounting spans and source-to-face distance on the same drawing. Identify frame members that may cast shadows and the route for graphics replacement. Record the tested LED model and driver arrangement with the print sample, so a change of substrate or frame detail triggers a fresh review rather than an assumed match.
Compare LED lightbox sources
- 20W rigid LED bar — DC24V, 470×24×16mm including lens, 2200lm ±10%, 10°×40° optics; check the final print and frame section.
- Linkable LED bar — DC24V; 212mm/9W, 319mm/14W or 480mm/20W; standard 20°×60° lens; confirm a compatible external driver and run limit.
- 7W mini LED bar — DC24V, 200×23×16mm, 770lm, standard 20°×60° lens; compare where mounting spans are shorter.
Which details are needed for a Paris Air Show photo-lightbox quotation?
Send the frame section, face dimensions, print material and sample, required colour temperature, mounting points and service opening. Confirm voltage, connector pinout, polarity and cable rating. Calculate wattage and driver headroom for the exact variants; do not apply one bar’s linking limit to every model.
Before ordering
Plan an accessible compatible external driver and check the assembled display with its actual print. These are components for exhibition lightboxes; fit in another supplier’s pavilion system and final colour appearance need project-specific verification.
Compare all 26 LED Modules below. Send the coordinated print-and-frame brief for help selecting the internal light source.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.