Building lightbox towers for a multi-brand packaging machinery booth at PACK EXPO Las Vegas? Compare internal LED bars for static printed graphics, so each division’s illuminated branding can be evaluated together before the exhibit is assembled.
How do I match several branded lightbox towers?
Prepare a face schedule showing each brand graphic, transmitting material, illuminated size and frame depth. Compare finished prints side by side under the intended white tone. Equal wattage does not ensure equal appearance when inks, materials or optical layouts differ. Test the source position and spacing for each distinct face before selecting production quantities.
Can every division use the same replacement LED bar?
Standardize only after comparing bar dimensions, lens direction, mounting points, connector pinout, voltage and control method across the actual frames. Keep a circuit and spare-parts list for each tower. A shared connector family or one nominal voltage does not establish interchangeability; retain separate tested layouts where the enclosures differ.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Should white LEDs or RGBW LEDs light the brand graphics?
Compare white-light bars first when the task is to keep printed branding legible and consistent across towers. A dual-CCT bar offers the two white channels in its selected variant; it needs compatible separate control. RGBW models below can be considered for a specified colour-changing effect, with their own control and print tests. Coloured light can alter the appearance of printed brand colours.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all 26 products below. Send the brand-face schedule, frame sections, intended white tone, connector details and preferred spare-parts plan for a component quote. Confirm each tower’s layout separately; LED bars do not include frames, printed graphics or machinery-demo equipment.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Building lightbox towers for a multi-brand packaging machinery booth at PACK EXPO Las Vegas? Compare internal LED bars for static printed graphics, so each division’s illuminated branding can be evaluated together before the exhibit is assembled.
How do I match several branded lightbox towers?
Prepare a face schedule showing each brand graphic, transmitting material, illuminated size and frame depth. Compare finished prints side by side under the intended white tone. Equal wattage does not ensure equal appearance when inks, materials or optical layouts differ. Test the source position and spacing for each distinct face before selecting production quantities.
Can every division use the same replacement LED bar?
Standardize only after comparing bar dimensions, lens direction, mounting points, connector pinout, voltage and control method across the actual frames. Keep a circuit and spare-parts list for each tower. A shared connector family or one nominal voltage does not establish interchangeability; retain separate tested layouts where the enclosures differ.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Should white LEDs or RGBW LEDs light the brand graphics?
Compare white-light bars first when the task is to keep printed branding legible and consistent across towers. A dual-CCT bar offers the two white channels in its selected variant; it needs compatible separate control. RGBW models below can be considered for a specified colour-changing effect, with their own control and print tests. Coloured light can alter the appearance of printed brand colours.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all 26 products below. Send the brand-face schedule, frame sections, intended white tone, connector details and preferred spare-parts plan for a component quote. Confirm each tower’s layout separately; LED bars do not include frames, printed graphics or machinery-demo equipment.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.