Choosing LED modules for an O-SHOW optical exhibition lightbox? Plan internal lighting for a fabric wall that can form a corner or stand separately. Compare LED bars around each wall's printed faces and usable frame space.
Can I split an L-shaped lightbox into separately lit walls?
Treat each wall as a separate lighting plan. Record its LED layout, supply, cable route and connector pinout before separating it. Recalculate the connected load for the chosen configuration; disconnect unused branches only as the system maker instructs. Test each wall independently before joining the corner.
What changes when a lightbox has one lit face instead of two?
A blockout back and a second transmitting print create different optical conditions. Test the actual front, rear and frame supports for bright edges, dark centres and corner shadows. Compare edge-lit bars with rear backlighting; keep the same chosen white tone across adjacent walls. Two lit faces do not automatically require twice the bars.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these a complete O-SHOW stand or universal replacement kit?
These are internal LED components, not the frame, fabric print or external arm lights. A modular stand brand does not establish fit. Check mounting, depth, connector wiring and power with the owner before replacing existing lights.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send both wall dimensions and frame sections, each lit-face/blockout arrangement and the supply labels. Ask for a sample layout for the corner and separate-wall configurations before ordering a repeat build.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Choosing LED modules for an O-SHOW optical exhibition lightbox? Plan internal lighting for a fabric wall that can form a corner or stand separately. Compare LED bars around each wall's printed faces and usable frame space.
Can I split an L-shaped lightbox into separately lit walls?
Treat each wall as a separate lighting plan. Record its LED layout, supply, cable route and connector pinout before separating it. Recalculate the connected load for the chosen configuration; disconnect unused branches only as the system maker instructs. Test each wall independently before joining the corner.
What changes when a lightbox has one lit face instead of two?
A blockout back and a second transmitting print create different optical conditions. Test the actual front, rear and frame supports for bright edges, dark centres and corner shadows. Compare edge-lit bars with rear backlighting; keep the same chosen white tone across adjacent walls. Two lit faces do not automatically require twice the bars.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these a complete O-SHOW stand or universal replacement kit?
These are internal LED components, not the frame, fabric print or external arm lights. A modular stand brand does not establish fit. Check mounting, depth, connector wiring and power with the owner before replacing existing lights.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send both wall dimensions and frame sections, each lit-face/blockout arrangement and the supply labels. Ask for a sample layout for the corner and separate-wall configurations before ordering a repeat build.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.