Planning a Novodek office visit to explore fabric lightboxes? Its website invites production introductions. Compare independent LED modules for your own joined-panel design; arrange the visit with Novodek directly.
Does joining two lightbox frames create one lighting chamber?
Not necessarily. Each frame may retain its own internal walls and lighting. Ask for a section through the join and compare the illuminated area with the graphic seam before choosing a layout.
Can changing LED bars remove a dark line at the panel join?
A frame divider or graphic seam may block light. Check the assembled join with the actual fabric first. Assess frame geometry, bar placement and optics together; extra wattage alone does not establish a remedy.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these approved replacement LEDs for Novodek or SEGO frames?
No approved fit is claimed. Use the selected model’s mechanical, optical and electrical specifications to assess your own build; consult the frame supplier before changing its complete system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send a section through your panel join, fabric details and proposed wiring through Contact us to compare independent sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Planning a Novodek office visit to explore fabric lightboxes? Its website invites production introductions. Compare independent LED modules for your own joined-panel design; arrange the visit with Novodek directly.
Does joining two lightbox frames create one lighting chamber?
Not necessarily. Each frame may retain its own internal walls and lighting. Ask for a section through the join and compare the illuminated area with the graphic seam before choosing a layout.
Can changing LED bars remove a dark line at the panel join?
A frame divider or graphic seam may block light. Check the assembled join with the actual fabric first. Assess frame geometry, bar placement and optics together; extra wattage alone does not establish a remedy.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Are these approved replacement LEDs for Novodek or SEGO frames?
No approved fit is claimed. Use the selected model’s mechanical, optical and electrical specifications to assess your own build; consult the frame supplier before changing its complete system.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send a section through your panel join, fabric details and proposed wiring through Contact us to compare independent sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.