Searching for Metis Strategy Summit lightbox LED modules or LED bars for corporate stage lightboxes? Compare internal sources for backlit SEG graphics behind speakers and presentations.
Which LEDs suit a printed corporate stage lightbox?
Compare edge-lit bars and rear-backlight bars with the actual logo print, usable frame depth and mounting spans. Choose source length, optics and spacing for the printed face. Existing frame and control systems need separate compatibility checks.
How do I check the logo for seated viewers and event photos?
Inspect the illuminated backdrop with the planned stage lighting and speaker positions, from audience seats and intended camera views. Check bright areas, glare and logo washout using the actual print and planned camera settings. Camera flicker performance is not established; test before selecting the sources.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What stage, print and power details should I send?
Send approved print samples, illuminated dimensions, internal depth, mounting spans, stage lighting, speaker positions, viewing distances, photo framing, service access, connectors and supply. These components illuminate printed graphics, not video screens. Do not assume they replace an existing constant-current lightbox system; verify the source and power arrangement.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your approved stage graphic and lighting plan to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Searching for Metis Strategy Summit lightbox LED modules or LED bars for corporate stage lightboxes? Compare internal sources for backlit SEG graphics behind speakers and presentations.
Which LEDs suit a printed corporate stage lightbox?
Compare edge-lit bars and rear-backlight bars with the actual logo print, usable frame depth and mounting spans. Choose source length, optics and spacing for the printed face. Existing frame and control systems need separate compatibility checks.
How do I check the logo for seated viewers and event photos?
Inspect the illuminated backdrop with the planned stage lighting and speaker positions, from audience seats and intended camera views. Check bright areas, glare and logo washout using the actual print and planned camera settings. Camera flicker performance is not established; test before selecting the sources.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What stage, print and power details should I send?
Send approved print samples, illuminated dimensions, internal depth, mounting spans, stage lighting, speaker positions, viewing distances, photo framing, service access, connectors and supply. These components illuminate printed graphics, not video screens. Do not assume they replace an existing constant-current lightbox system; verify the source and power arrangement.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send your approved stage graphic and lighting plan to compare suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.