Looking for MEDICA pavilion lightbox LED modules for company or product graphics? First confirm whether lighting comes with your display package or is an internal-component purchase managed by your pavilion builder.
Do I need LED bars if my pavilion package includes a lightbox?
Confirm what is included and who maintains the lighting before ordering components. Submitting your printed graphic does not establish that you own the frame or should replace its LEDs. These bars are for internal graphic-lightbox work specified by the owner or authorized builder.
Who should specify LEDs for a shared pavilion graphic panel?
The party controlling the actual enclosure, power supply and wiring should confirm the source requirements. Separate each illuminated company graphic from shared branding and demonstration equipment. Use its lit dimensions, clear depth, front sample and mounting plan when comparing bars.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What information is needed for a pavilion lightbox component order?
Confirm authority to modify the lightbox, then send its frame section, graphic sample, LED mounting drawing and power and connector labels. Check voltage, total load, polarity, pinout and optics. These are exhibition graphic-lightbox components; medical equipment and examination lighting have separate requirements.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Have your pavilion builder send the actual graphic-lightbox details to review suitable internal bars before ordering.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for MEDICA pavilion lightbox LED modules for company or product graphics? First confirm whether lighting comes with your display package or is an internal-component purchase managed by your pavilion builder.
Do I need LED bars if my pavilion package includes a lightbox?
Confirm what is included and who maintains the lighting before ordering components. Submitting your printed graphic does not establish that you own the frame or should replace its LEDs. These bars are for internal graphic-lightbox work specified by the owner or authorized builder.
Who should specify LEDs for a shared pavilion graphic panel?
The party controlling the actual enclosure, power supply and wiring should confirm the source requirements. Separate each illuminated company graphic from shared branding and demonstration equipment. Use its lit dimensions, clear depth, front sample and mounting plan when comparing bars.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What information is needed for a pavilion lightbox component order?
Confirm authority to modify the lightbox, then send its frame section, graphic sample, LED mounting drawing and power and connector labels. Check voltage, total load, polarity, pinout and optics. These are exhibition graphic-lightbox components; medical equipment and examination lighting have separate requirements.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Have your pavilion builder send the actual graphic-lightbox details to review suitable internal bars before ordering.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.