Looking for Manufacturing Technology Series EAST or EASTEC lightbox LED modules? Compare internal LED bars for illuminated graphics within a display that also has separate monitor or regular wall panels.
Which sections of a mixed display wall need internal LEDs?
Mark the actual backlit graphic faces on the drawing before choosing quantities. A fabric-covered wall or a monitor panel is not automatically a lightbox. Use the lit dimensions, clear depth, front sample and mounting positions of the illuminated sections.
Do monitor panels need the same LED layout as lightboxes?
Specify each system separately. The monitor and its support have their own requirements, while internal bars illuminate the lightbox graphic. Do not calculate lightbox LED quantities from the total area of monitor panels and ordinary display walls.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What drawings help choose the right lightbox LED bars?
Send a layout identifying illuminated and other wall sections, actual lightbox cross-sections, front samples and mounting drawings. Include the LED, power and connector labels and calculate the selected bar loads; identify separate demonstration equipment and circuits.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your marked display layout to review internal LED bars for the actual graphic lightboxes within your mixed exhibit.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for Manufacturing Technology Series EAST or EASTEC lightbox LED modules? Compare internal LED bars for illuminated graphics within a display that also has separate monitor or regular wall panels.
Which sections of a mixed display wall need internal LEDs?
Mark the actual backlit graphic faces on the drawing before choosing quantities. A fabric-covered wall or a monitor panel is not automatically a lightbox. Use the lit dimensions, clear depth, front sample and mounting positions of the illuminated sections.
Do monitor panels need the same LED layout as lightboxes?
Specify each system separately. The monitor and its support have their own requirements, while internal bars illuminate the lightbox graphic. Do not calculate lightbox LED quantities from the total area of monitor panels and ordinary display walls.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What drawings help choose the right lightbox LED bars?
Send a layout identifying illuminated and other wall sections, actual lightbox cross-sections, front samples and mounting drawings. Include the LED, power and connector labels and calculate the selected bar loads; identify separate demonstration equipment and circuits.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your marked display layout to review internal LED bars for the actual graphic lightboxes within your mixed exhibit.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.