Linkable LED Lightbox Bars

Choose a DC24V lightbox bar by its lighting method, size and connection arrangement. The run quantities below apply to compatible bars of the selected model, subject to the power supply, controller where needed, wiring and voltage drop.

White-light bars and modules

Model Run planning
212 / 319 / 480 mm edge-lit bars · 9 / 14 / 20 W Up to 5 bars per run
360 mm slim bar · 10 W · 9°×50° Up to 6 bars per run
360 mm asymmetric bar · 13 W Up to 6 bars per run
313 mm compact bar · 12 W Up to 6 bars per run
360 mm DC-socket bar · 10 W · 15°×45° Up to 6 bars per run
7 W side-lit module · square or round fixing hole Up to 8 modules per run
710 mm optical bar · 27.5 W Recommended: no more than 4 bars per run
143 / 270.5 / 398 mm backlight bars · 3 / 6 / 9 W Up to 5 bars per run
Aluminum-housed modules · 574–964 mm · 22–32 W Up to 2 modules per branch
360 mm Molex bar · 10 W · 15°×45° Recommended: no more than 5 bars per run
517 mm adjacent-linking bar · 12 W · 3-pin Confirm permitted run quantity before ordering

White-light variants use a selected fixed colour temperature. Check the sizes, CCT and pack quantities on each product page; options differ by model. Four aluminum-housed modules require two separate branches of two in parallel from a correctly rated DC24V supply. The 517 mm 12 W model supports adjacent 3-pin linking, but its numeric run limit is not published.

RGB and RGBW bars

Model and control Run planning
24 W RGB bar · matching 4-pin RGB control Up to 5 bars per run · 120 W nominal bar load
32 W RGBW bar · matching 5-wire RGBW control Up to 2 bars per run · 64 W nominal bar load
400 mm 30 W RGBW bar · matching 5-wire RGBW control Up to 5 bars per run · 150 W nominal bar load

RGBW provides an independent white channel. For these colour models, Bar Only excludes the power supply and controller; Complete Kit contents depend on the selected Accessories variant. Check the listed components and plug before ordering.

Plan power and installation

Nominal bar loads are not driver ratings. Use compatible DC24V constant-voltage power and a matching controller where required, with suitable operating headroom. Confirm cable capacity, connector pinout, polarity and voltage drop. Mixed-model connections need separate confirmation; matching connector shells alone do not establish compatibility.

Test the layout with the actual frame, graphic and cabinet depth. For a matched power or control quotation, send the model links, bars per run, frame dimensions and cable arrangement. For other connection formats, compare plug-in lightbox bars.

Skip to results list

Active filters:

14 items
Column grid
Column grid

Filter

Active filters:

Choose a DC24V lightbox bar by its lighting method, size and connection arrangement. The run quantities below apply to compatible bars of the selected model, subject to the power supply, controller where needed, wiring and voltage drop.

White-light bars and modules

Model Run planning
212 / 319 / 480 mm edge-lit bars · 9 / 14 / 20 W Up to 5 bars per run
360 mm slim bar · 10 W · 9°×50° Up to 6 bars per run
360 mm asymmetric bar · 13 W Up to 6 bars per run
313 mm compact bar · 12 W Up to 6 bars per run
360 mm DC-socket bar · 10 W · 15°×45° Up to 6 bars per run
7 W side-lit module · square or round fixing hole Up to 8 modules per run
710 mm optical bar · 27.5 W Recommended: no more than 4 bars per run
143 / 270.5 / 398 mm backlight bars · 3 / 6 / 9 W Up to 5 bars per run
Aluminum-housed modules · 574–964 mm · 22–32 W Up to 2 modules per branch
360 mm Molex bar · 10 W · 15°×45° Recommended: no more than 5 bars per run
517 mm adjacent-linking bar · 12 W · 3-pin Confirm permitted run quantity before ordering

White-light variants use a selected fixed colour temperature. Check the sizes, CCT and pack quantities on each product page; options differ by model. Four aluminum-housed modules require two separate branches of two in parallel from a correctly rated DC24V supply. The 517 mm 12 W model supports adjacent 3-pin linking, but its numeric run limit is not published.

RGB and RGBW bars

Model and control Run planning
24 W RGB bar · matching 4-pin RGB control Up to 5 bars per run · 120 W nominal bar load
32 W RGBW bar · matching 5-wire RGBW control Up to 2 bars per run · 64 W nominal bar load
400 mm 30 W RGBW bar · matching 5-wire RGBW control Up to 5 bars per run · 150 W nominal bar load

RGBW provides an independent white channel. For these colour models, Bar Only excludes the power supply and controller; Complete Kit contents depend on the selected Accessories variant. Check the listed components and plug before ordering.

Plan power and installation

Nominal bar loads are not driver ratings. Use compatible DC24V constant-voltage power and a matching controller where required, with suitable operating headroom. Confirm cable capacity, connector pinout, polarity and voltage drop. Mixed-model connections need separate confirmation; matching connector shells alone do not establish compatibility.

Test the layout with the actual frame, graphic and cabinet depth. For a matched power or control quotation, send the model links, bars per run, frame dimensions and cable arrangement. For other connection formats, compare plug-in lightbox bars.