Looking for Ilmac lightbox LED modules or LED bars for double-sided exhibition graphics? Compare internal sources for compatible indoor wall lightboxes and freestanding graphic lightboxes, using each face’s actual geometry.
Which LED modules suit Ilmac graphic lightboxes?
Compare edge lighting and rear backlighting with lit dimensions, usable depth, mounting spans and print material. Check source length, optics and distance to each graphic. LED bars do not include frames or printed faces.
Can the same LEDs light single- and double-sided boxes?
Do not transfer a single-face layout without checking both source-to-face distances. A central source arrangement and side-mounted bars need different clearance checks. Test both printed faces for bright spots and shadows; outer frame depth alone does not establish usable optical space.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What information is needed for a double-sided lightbox?
Send both graphics, lit dimensions, usable depths, mounting spans, support arrangement, connectors and supply voltage. Confirm positions, load and wiring before ordering. Freestanding stability and frame approval require separate checks; graphic LEDs are not laboratory instrument lighting.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send the single- or double-face lightbox drawing and print samples to select suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for Ilmac lightbox LED modules or LED bars for double-sided exhibition graphics? Compare internal sources for compatible indoor wall lightboxes and freestanding graphic lightboxes, using each face’s actual geometry.
Which LED modules suit Ilmac graphic lightboxes?
Compare edge lighting and rear backlighting with lit dimensions, usable depth, mounting spans and print material. Check source length, optics and distance to each graphic. LED bars do not include frames or printed faces.
Can the same LEDs light single- and double-sided boxes?
Do not transfer a single-face layout without checking both source-to-face distances. A central source arrangement and side-mounted bars need different clearance checks. Test both printed faces for bright spots and shadows; outer frame depth alone does not establish usable optical space.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What information is needed for a double-sided lightbox?
Send both graphics, lit dimensions, usable depths, mounting spans, support arrangement, connectors and supply voltage. Confirm positions, load and wiring before ordering. Freestanding stability and frame approval require separate checks; graphic LEDs are not laboratory instrument lighting.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send the single- or double-face lightbox drawing and print samples to select suitable internal sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.