Looking for Health & Wellbeing at Work lightbox LED modules? Compare internal bars for a printed brand wall behind your consultation stand. A stand builder documents a lightbox wall at this event; choose sources for your own frame and graphic material.
How do I avoid bright LED bands behind a printed lightbox wall?
Test the actual translucent print in the intended frame depth. Review source direction, spacing and clearance if bright stripes or dark areas appear. Compare the verified optics below before fixing quantities; the wall’s overall width alone does not determine the correct LED layout.
Will a higher-output LED bar make my message easier to read?
Output is only part of the result. Check the illuminated graphic from the aisle and nearby seating, including text contrast and any visible hot spots. Resolve unsuitable print material or source placement before adding power. The LED choice does not establish a health or wellbeing benefit.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Do I need new LED bars whenever I change the printed graphic?
Not automatically. A different print material, opacity or frame arrangement can change light transmission. Test the new face with the existing verified sources and electrical system, then decide whether layout or quantity needs adjustment. A new message alone does not prove replacement is needed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send wall dimensions, frame section, printed material and a photo of any bright or dark areas through Contact us for a source comparison.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for Health & Wellbeing at Work lightbox LED modules? Compare internal bars for a printed brand wall behind your consultation stand. A stand builder documents a lightbox wall at this event; choose sources for your own frame and graphic material.
How do I avoid bright LED bands behind a printed lightbox wall?
Test the actual translucent print in the intended frame depth. Review source direction, spacing and clearance if bright stripes or dark areas appear. Compare the verified optics below before fixing quantities; the wall’s overall width alone does not determine the correct LED layout.
Will a higher-output LED bar make my message easier to read?
Output is only part of the result. Check the illuminated graphic from the aisle and nearby seating, including text contrast and any visible hot spots. Resolve unsuitable print material or source placement before adding power. The LED choice does not establish a health or wellbeing benefit.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Do I need new LED bars whenever I change the printed graphic?
Not automatically. A different print material, opacity or frame arrangement can change light transmission. Test the new face with the existing verified sources and electrical system, then decide whether layout or quantity needs adjustment. A new message alone does not prove replacement is needed.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Browse all LED Modules below. Send wall dimensions, frame section, printed material and a photo of any bright or dark areas through Contact us for a source comparison.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.