Glantz Sign Cabinet Building Class covers cabinet assembly, lighting and hands-on face tensioning. For an independent indoor lightbox, compare LED candidates using the actual face in its final assembled condition. All LED Modules are available below for model comparison.
Compare the face before and after tensioning
Use the actual graphic and record its position before and after it is secured in the frame. Photograph both states from the same viewing position. Note creases, sagging or face displacement separately from bright and dark regions; changing the face position can change what you observe.
Approve the complete illuminated assembly
Keep the LED layout and viewing conditions consistent during the comparison. Assess the sample with its face, retainers and other final parts installed. A loose sheet held above bare LEDs is not a finished lightbox proof; repeat the review if face installation changes before the production order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can a lighting pattern be approved while the lightbox face is still loose?
Treat it as a preliminary observation. Recheck the actual graphic in its final mounted condition and document the result. The review does not establish compatibility with a classroom supplier’s frame or promise a uniform illuminated face.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the face material, graphic, frame drawing, before-and-after observations, final assembly details, LED candidates and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Glantz Sign Cabinet Building Class covers cabinet assembly, lighting and hands-on face tensioning. For an independent indoor lightbox, compare LED candidates using the actual face in its final assembled condition. All LED Modules are available below for model comparison.
Compare the face before and after tensioning
Use the actual graphic and record its position before and after it is secured in the frame. Photograph both states from the same viewing position. Note creases, sagging or face displacement separately from bright and dark regions; changing the face position can change what you observe.
Approve the complete illuminated assembly
Keep the LED layout and viewing conditions consistent during the comparison. Assess the sample with its face, retainers and other final parts installed. A loose sheet held above bare LEDs is not a finished lightbox proof; repeat the review if face installation changes before the production order.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Can a lighting pattern be approved while the lightbox face is still loose?
Treat it as a preliminary observation. Recheck the actual graphic in its final mounted condition and document the result. The review does not establish compatibility with a classroom supplier’s frame or promise a uniform illuminated face.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the face material, graphic, frame drawing, before-and-after observations, final assembly details, LED candidates and quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.