Specifying backlit graphics within an Enterprise Connect rental exhibit? Select internal light sources against the actual frame allocated by the rental provider, rather than the stand footprint or a generic rendering. This collection helps fabricators prepare a frame-specific component comparison; all 26 LED Modules products are available below.
Identify the allocated frame before selecting a replacement source
Request the actual frame reference, usable interior dimensions, existing light-source arrangement and access points. Establish with the rental provider which changes are permitted and who supplies the driver, wiring and mounting parts. A rental package may already include its light sources; confirm a real component requirement before ordering. Do not infer bar length, voltage or connectors from the exhibit's overall floor area.
Recheck the component plan if the rental asset changes
Keep the assigned frame reference and revision with the proposed LED model, quantity, voltage, connector and driver. If the provider allocates a different frame or source arrangement, compare those details before accepting the old parts list. Review a representative printed face in the actual assembly. Borrowed frames can differ in depth and access, so a product that suited another rental is not automatically compatible.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does buying LED modules replace the complete rental exhibit package?
No. These are internal light sources, not rental frames, printed faces, installation services or video-wall components. Confirm whether modules are needed, obtain agreement for modifications and verify the selected model's mounting and electrical requirements with the responsible fabricator.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the allocated frame reference, interior measurements, existing-source details, approved changes and component supply responsibilities for a review. Compare the 26 products below, then confirm the actual rental asset before placing the parts order.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Specifying backlit graphics within an Enterprise Connect rental exhibit? Select internal light sources against the actual frame allocated by the rental provider, rather than the stand footprint or a generic rendering. This collection helps fabricators prepare a frame-specific component comparison; all 26 LED Modules products are available below.
Identify the allocated frame before selecting a replacement source
Request the actual frame reference, usable interior dimensions, existing light-source arrangement and access points. Establish with the rental provider which changes are permitted and who supplies the driver, wiring and mounting parts. A rental package may already include its light sources; confirm a real component requirement before ordering. Do not infer bar length, voltage or connectors from the exhibit's overall floor area.
Recheck the component plan if the rental asset changes
Keep the assigned frame reference and revision with the proposed LED model, quantity, voltage, connector and driver. If the provider allocates a different frame or source arrangement, compare those details before accepting the old parts list. Review a representative printed face in the actual assembly. Borrowed frames can differ in depth and access, so a product that suited another rental is not automatically compatible.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does buying LED modules replace the complete rental exhibit package?
No. These are internal light sources, not rental frames, printed faces, installation services or video-wall components. Confirm whether modules are needed, obtain agreement for modifications and verify the selected model's mounting and electrical requirements with the responsible fabricator.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the allocated frame reference, interior measurements, existing-source details, approved changes and component supply responsibilities for a review. Compare the 26 products below, then confirm the actual rental asset before placing the parts order.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.