Looking for DSEI UK lightbox LED modules or LED bars for static exhibition graphics beside touchscreen displays? Compare internal sources for compatible indoor printed lightboxes separately from the electronic screens.
Which LED modules suit graphic lightboxes beside demo screens?
Compare edge lighting and rear backlighting with the actual print, lit dimensions, usable frame depth and mounting spans. Check length, optics and source-to-print distance. Test the graphic with planned screen brightness and viewing positions; LED bars do not include a frame, print or screen.
Can a lightbox LED supply also power a touchscreen?
Do not assume shared power from physical proximity. Specify each device’s voltage, current, connector and manufacturer requirements separately. Confirm the lightbox load and approved wiring; the featured LED modules are internal graphic sources, not screen backlights or screen power supplies.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What graphic and screen-layout details should I send?
Send print samples, lit dimensions, usable depth, mounting spans, lightbox voltage and connector photos. Label screen power and service access separately on the layout. Confirm graphic source positions, load and wiring before ordering, keeping both maintenance routes accessible.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your lightbox specification and annotated screen layout to select compatible graphic lighting sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for DSEI UK lightbox LED modules or LED bars for static exhibition graphics beside touchscreen displays? Compare internal sources for compatible indoor printed lightboxes separately from the electronic screens.
Which LED modules suit graphic lightboxes beside demo screens?
Compare edge lighting and rear backlighting with the actual print, lit dimensions, usable frame depth and mounting spans. Check length, optics and source-to-print distance. Test the graphic with planned screen brightness and viewing positions; LED bars do not include a frame, print or screen.
Can a lightbox LED supply also power a touchscreen?
Do not assume shared power from physical proximity. Specify each device’s voltage, current, connector and manufacturer requirements separately. Confirm the lightbox load and approved wiring; the featured LED modules are internal graphic sources, not screen backlights or screen power supplies.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What graphic and screen-layout details should I send?
Send print samples, lit dimensions, usable depth, mounting spans, lightbox voltage and connector photos. Label screen power and service access separately on the layout. Confirm graphic source positions, load and wiring before ordering, keeping both maintenance routes accessible.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your lightbox specification and annotated screen layout to select compatible graphic lighting sources.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.