DPES SIGN EXPO CHINA connects signage, display and LED-lighting suppliers, including lightbox-source manufacturers. Compare internal LED components with a model-specific source-power record. Browse all LED Modules below.
Record the source load by exact model and circuit
List each bar model, its stated wattage and the quantity on each planned circuit. Sum the source wattages without treating that sum as the final power-supply specification. Confirm the separate supply, wiring and control requirements for the complete arrangement.
Keep electrical limits attached to their model
Do not transfer a published run limit to a different bar or connector. The dual-CCT bar needs separate compatible control; confirm the intended channel setting and supply requirement. Have the wiring arrangement checked before assembly rather than sizing it from a product image.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does matching the total bar wattage fully specify the power supply?
No. Voltage, circuit loading, connector limits, controls and supply installation also need confirmation. A source-power list is an input to component selection, not approval of the complete electrical design.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the bar models, quantities per circuit, frame layout, intended control, supply details and project quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
Flexible LED Stone Backlight Panel – 480×240mm, 24W/48W -
FOGA SYSTEM 10W LED Module – Edge-Lit Lightbox Bar -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
Side-Lit LED Module for MODULAP Systems -
12W/18W LED Module for MODULAP Fabric Lightbox -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens
DPES SIGN EXPO CHINA connects signage, display and LED-lighting suppliers, including lightbox-source manufacturers. Compare internal LED components with a model-specific source-power record. Browse all LED Modules below.
Record the source load by exact model and circuit
List each bar model, its stated wattage and the quantity on each planned circuit. Sum the source wattages without treating that sum as the final power-supply specification. Confirm the separate supply, wiring and control requirements for the complete arrangement.
Keep electrical limits attached to their model
Do not transfer a published run limit to a different bar or connector. The dual-CCT bar needs separate compatible control; confirm the intended channel setting and supply requirement. Have the wiring arrangement checked before assembly rather than sizing it from a product image.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
Does matching the total bar wattage fully specify the power supply?
No. Voltage, circuit loading, connector limits, controls and supply installation also need confirmation. A source-power list is an input to component selection, not approval of the complete electrical design.
Before ordering
Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Send the bar models, quantities per circuit, frame layout, intended control, supply details and project quantity through our contact page.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.