For signmakers researching Digital Print Expo Ireland LED modules, this selection covers internal lightbox bars and their power requirements. The official programme lists LED modules, supplies and controls; our guide helps you compare components for your own sign or SEG fabric frame.
Match the bar, supply and controller
Start with the selected bar’s voltage, rated watts, documented dimming behaviour and connector pinout. Keep the lightbox face, depth and layout constant when testing brightness control. A DC24V label alone does not establish controller compatibility.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Will any smart controller dim these lightbox bars?
No. Check the control method and output against the exact model. The 12W/18W MODULAP module documents reduced brightness to about 50%, then switches off below that point; do not specify it as a smooth dim-to-zero solution. Test the complete circuit before ordering production quantities.
Does a five-bar connection limit size the power supply?
No. The featured linkable family permits up to five compatible bars per run. Calculate total rated watts across all runs, then confirm driver capacity, cable and connector ratings, polarity and voltage drop. A controller’s channel limit must also suit the connected load.
Can a controller turn a fixed-white bar into colour-changing lighting?
No. Choose the required fixed CCT before ordering these white-light bars. For colour-changing projects, select a product documented for that function and verify its wiring and controller. Bars, a compatible external supply and any control equipment are separate purchasing decisions.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
Side-Lit LED Module for MODULAP Systems -
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed -
12W Dual-CCT Switchable LED Lightbox Bar – 24V
For signmakers researching Digital Print Expo Ireland LED modules, this selection covers internal lightbox bars and their power requirements. The official programme lists LED modules, supplies and controls; our guide helps you compare components for your own sign or SEG fabric frame.
Match the bar, supply and controller
Start with the selected bar’s voltage, rated watts, documented dimming behaviour and connector pinout. Keep the lightbox face, depth and layout constant when testing brightness control. A DC24V label alone does not establish controller compatibility.
Choose the light source for the display
- DC24V linkable edge-lit bars: 212mm/9W, 319mm/14W or 480mm/20W for modular lightbox builds.
- 12W/18W DC24V MODULAP lightbox module: 470mm edge-lighting format for compatible fabric frames; verify the connector and fit.
- 20W DC24V rigid lightbox bar: 470mm, 2200lm ±10%, for tested indoor SEG and illuminated-sign layouts.
- 7W DC24V compact lightbox bar: 200mm, 770lm, 200×23×16mm body for short frame sections. Check the Molex 5557 / Mini-Fit Jr. connector family, mating pinout and fit before replacement.
Will any smart controller dim these lightbox bars?
No. Check the control method and output against the exact model. The 12W/18W MODULAP module documents reduced brightness to about 50%, then switches off below that point; do not specify it as a smooth dim-to-zero solution. Test the complete circuit before ordering production quantities.
Does a five-bar connection limit size the power supply?
No. The featured linkable family permits up to five compatible bars per run. Calculate total rated watts across all runs, then confirm driver capacity, cable and connector ratings, polarity and voltage drop. A controller’s channel limit must also suit the connected load.
Can a controller turn a fixed-white bar into colour-changing lighting?
No. Choose the required fixed CCT before ordering these white-light bars. For colour-changing projects, select a product documented for that function and verify its wiring and controller. Bars, a compatible external supply and any control equipment are separate purchasing decisions.
Before ordering
LED Modules illuminate a printed face inside a lightbox; they are not complete signs. Confirm connector polarity, driver capacity, thermal conditions and connection limits. Check the selected bar length and product pack quantity. Do not assume outdoor or moisture suitability from a retrofit application.
Send cabinet photos, internal dimensions, frame drawings, the existing driver specification and proposed product links through our contact page to discuss a trial selection.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.