Specifying double-sided hanging lightboxes for a CEDIA Expo AV stand? Select internal LED sources against the two printed faces and the real enclosure section. Bright brand signage and nearby television or theater demonstrations need separate assessment; these modules illuminate graphics, not the display screens.
Does a double-sided sign need twice as many LED bars?
Face count alone cannot determine the source quantity. Compare the transmitting materials on both sides, their distance from the LEDs, internal supports and the available bar-mounting positions. Test both faces together before approving spacing and output. Edge-lit and rear-backlight bars use different optical layouts; changing the model may require a new layout rather than a direct bar-for-bar replacement.
How do I keep hanging lightboxes from competing with AV demos?
Check a powered graphic sample from the intended sign sightline and from the screen-demo viewing position. Assess light spill, reflections and visible graphic detail in the planned room lighting. If control is needed, ask about compatibility for the exact LED model, power supply and controller before ordering; dual-CCT switching does not by itself establish dimming or AV-control integration.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for an overhead lightbox LED quote?
Provide drawings of both graphic faces and the internal section, clear dimensions, source mounting space, power routes and connector details. Include a plan for service access and identify the separately specified frame, printed graphics, power equipment and suspension hardware. An LED bar purchase does not include a complete hanging sign or its rigging; have the assembly and venue requirements checked by the responsible installer.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all 26 lightbox products below and send the two-face layout, actual front samples and source schedule for a component quote. Identify rented parts and confirm modification permission first. We can review internal LED options; screen illumination and smart-home lighting fixtures require separate products.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Specifying double-sided hanging lightboxes for a CEDIA Expo AV stand? Select internal LED sources against the two printed faces and the real enclosure section. Bright brand signage and nearby television or theater demonstrations need separate assessment; these modules illuminate graphics, not the display screens.
Does a double-sided sign need twice as many LED bars?
Face count alone cannot determine the source quantity. Compare the transmitting materials on both sides, their distance from the LEDs, internal supports and the available bar-mounting positions. Test both faces together before approving spacing and output. Edge-lit and rear-backlight bars use different optical layouts; changing the model may require a new layout rather than a direct bar-for-bar replacement.
How do I keep hanging lightboxes from competing with AV demos?
Check a powered graphic sample from the intended sign sightline and from the screen-demo viewing position. Assess light spill, reflections and visible graphic detail in the planned room lighting. If control is needed, ask about compatibility for the exact LED model, power supply and controller before ordering; dual-CCT switching does not by itself establish dimming or AV-control integration.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I send for an overhead lightbox LED quote?
Provide drawings of both graphic faces and the internal section, clear dimensions, source mounting space, power routes and connector details. Include a plan for service access and identify the separately specified frame, printed graphics, power equipment and suspension hardware. An LED bar purchase does not include a complete hanging sign or its rigging; have the assembly and venue requirements checked by the responsible installer.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all 26 lightbox products below and send the two-face layout, actual front samples and source schedule for a component quote. Identify rented parts and confirm modification permission first. We can review internal LED options; screen illumination and smart-home lighting fixtures require separate products.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.