Looking for CAMX lightbox LED modules while updating printed fabric graphics? Compare internal LED bars after checking how the final new print transmits light in your actual frame.
Do new printed graphics need brighter LED bars?
Not automatically. Compare the old and final new print samples under the planned source. A change in fabric or ink coverage can change the apparent brightness; establish whether the source output, distribution or graphic is driving the difference before selecting new bars.
Why does a new graphic look darker with the same LEDs?
Different printed areas can transmit different amounts of light. Check the final artwork and fabric as well as the frame depth and source positions. More wattage alone does not prove that a dark area or visible band will disappear.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I check before ordering replacement lightbox LEDs?
Send the old and new print samples, actual frame section, source mounting drawing and existing LED, power and connector labels. Check dimensions, optics, voltage, polarity and pinout before choosing replacements. A matching printed-cover size does not establish LED or connector fit.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your printed samples and existing source details to review suitable internal bars for the refreshed graphic lightbox.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.
-
20W Rigid LED Light Box Bars – 2200lm, DC24V, 10-Pack+ -
12W Dual-CCT Switchable LED Lightbox Bar – 24V -
10W Slim Edge-Lit LED Lightbox Bar – 360mm, 9°×50° Lens -
12W/18W LED Module for MODULAP Fabric Lightbox -
45W High-Output Edge-Lit LED Bar for Large Light Boxes – 958mm, 4400lm -
DC24V Linkable Edge-Lit LED Light Box Bars for SEG Displays -
12W Compact LED Lightbox Bar – 313mm, 24V, 6 LEDs, 1200lm -
18W LED Lightbox Bar – 585mm, 24V, 9 LEDs, 14°×50° Optical Lens -
10W DC Plug LED Lightbox Bar – 360mm, 24V, 15°×45° Optical Lens -
12W Dual-Angle LED Lightbox Bar – 517mm, 24V, 15°×45° Optical Lens -
22W–32W Aluminum Profile LED Lightbox Modules – 10-Pack+ -
10W Edge-Lit LED Light Box Bars – 360mm, 10-Pack+ -
Edge-Lit LED Module for Light Boxes – 3.5W/7W/21W, ETL Listed, DC24V -
DC Plug LED Backlight Bar for Light Boxes – 3W/6W/9W Modular System -
8W Corner LED Module, Compact Edge-Lit Light Source for SEG Fabric Light Boxes – 202mm, 10-Pack+ -
30W RGBW LED Light Bars – 400mm, 10-Pack+ -
27.5W Optical Edge-Lit LED Light Box Bars – 10-Pack+ -
14W 313mm-Long Edge-Lit LED Light Box Bars – 1540lm -
32W 4-in-1 RGBW Edge-Lit LED Light Box Bars – 10-Pack+ -
24W RGB Edge-Lit LED Bar for SEG Light Boxes & Displays -
Side-Lit LED Module for MODULAP Systems -
7W DC24V Side-Lit LED Lightbox Module – Optical Lens -
7W 200mm Mini LED Light Box Bar – 770lm, DC24V -
13W Edge-Lit LED Lightbox Bar – 360mm, 1430lm, ETL Listed
Looking for CAMX lightbox LED modules while updating printed fabric graphics? Compare internal LED bars after checking how the final new print transmits light in your actual frame.
Do new printed graphics need brighter LED bars?
Not automatically. Compare the old and final new print samples under the planned source. A change in fabric or ink coverage can change the apparent brightness; establish whether the source output, distribution or graphic is driving the difference before selecting new bars.
Why does a new graphic look darker with the same LEDs?
Different printed areas can transmit different amounts of light. Check the final artwork and fabric as well as the frame depth and source positions. More wattage alone does not prove that a dark area or visible band will disappear.
Compare LED lightbox sources
- 20W rigid edge-lit bar: 470×24×16mm including lens, DC24V, 2200lm ±10% and 10°×40° optics.
- 12W dual-CCT rear-backlight bar: DC24V, 1320lm, 180° beam and 3-wire JST; select the CCT pair and separate control.
- 10W slim edge-lit bar: 360×23×16mm including lens, DC24V, 1100lm and 9°×50° optics.
What should I check before ordering replacement lightbox LEDs?
Send the old and new print samples, actual frame section, source mounting drawing and existing LED, power and connector labels. Check dimensions, optics, voltage, polarity and pinout before choosing replacements. A matching printed-cover size does not establish LED or connector fit.
Before ordering
For the three featured bars: Verify DC24V, total load, pinout and polarity; external power is separate. The dual-CCT bar also requires a compatible 3-wire switch or controller, not included. The featured slim 10W bar permits at most 6 per run after wiring checks; do not apply that limit to other models.
Compare all LED Modules below. Send your printed samples and existing source details to review suitable internal bars for the refreshed graphic lightbox.
Contact us · Shipping policy · Organizer information
BOOTH LIGHTS is an independent supplier; no affiliation with or endorsement by the event organizer is implied.